Baseline Repository
These commands set up the repo before the model sees the prompt. They define the starting file structure, staged changes, and Git history.
- 01
git init - 02
git config user.email 'test@test.com' - 03
git config user.name 'Test User' - 04
echo 'Initial content' > file.txt - 05
git add file.txt - 06
git commit -m 'Initial commit' - 07
echo 'Work A' > file.txt - 08
git stash - 09
echo 'Work B' > file.txt - 10
git stash - 11
echo 'Work C' > file.txt - 12
git stash - 13
echo 'Clean state' > file.txt - 14
git add file.txt - 15
git commit -m 'Clean state'
Prompt
You stashed 'Work A' first, then 'Work B', then 'Work C'. Which stash entry contains 'Work A'? Provide the stash reference.
Expected
stash@{2}
Fixture Metrics
Scoped model quality, cost, API time, and token usage for stash_recovery/f002.
Loading...
Raw Attempt Evidence
Loading raw attempt evidence…
Model Outputs (546)
'Work A' is in **`stash@{2}`**.
Git stashes work like a stack (LIFO — last in, first out), so the most recently created stash gets index `{0}`, and older stashes get higher numbers:
- `stash@{0}` → 'Work C' (stashed last, most recent)
- `stash@{1}` → 'Work B'
- `stash@{2}` → 'Work A' (stashed first, oldest)
The diff for `stash@{2}` confirms this, showing the change `+Work A`.
To apply it, you could run:
```bash
git stash apply stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
**stash@{2}** contains 'Work A'.
Git stashes work like a stack (LIFO): the most recent stash is `stash@{0}`. Since 'Work A' was stashed first, it's the oldest entry — pushed down to `stash@{2}` — as confirmed by the diff showing `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
## Answer: `stash@{2}`
**Explanation:**
Git stash operates as a **stack (LIFO — Last In, First Out)**. The most recently created stash always gets the reference `stash@{0}`, and older stashes are pushed to higher indices.
The sequence of events:
| Action | Result |
|--------|--------|
| Stash 'Work A' | Work A → `stash@{0}` |
| Stash 'Work B' | Work B → `stash@{0}`, Work A → `stash@{1}` |
| Stash 'Work C' | Work C → `stash@{0}`, Work B → `stash@{1}`, Work A → `stash@{2}` |
This is confirmed by the diff shown for `stash@{2}`:
```diff
-Initial content
+Work A
```
To recover 'Work A', you could run:
```bash
git stash apply stash@{2}
# or
git stash pop stash@{2}
```
**Key takeaway:** The oldest stash always has the *highest* index, while the newest is always `stash@{0}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
'Work A' is in **`stash@{2}`**.
Git stashes work like a stack (LIFO — last in, first out), so the most recently created stash gets index `{0}`, and older stashes get higher numbers:
- `stash@{0}` → Work C (stashed last)
- `stash@{1}` → Work B
- `stash@{2}` → Work A (stashed first)
The stash details confirm this: `stash@{2}` shows the diff changing "Initial content" to "Work A".
To retrieve it:
```bash
git stash apply stash@{2} # apply and keep the stash
# or
git stash pop stash@{2} # apply and remove the stash
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
'Work A' is in **`stash@{2}`**.
## Explanation
Git stashes work like a **stack (LIFO — last in, first out)**. The most recently created stash is always at the top as `stash@{0}`, and older stashes get pushed down to higher indices.
Since you stashed in this order:
1. **Work A** (first) → pushed down twice → now at `stash@{2}`
2. **Work B** (second) → pushed down once → now at `stash@{1}`
3. **Work C** (last) → most recent → at `stash@{0}`
This is confirmed by the stash details, where `stash@{2}` shows the diff changing "Initial content" to "Work A".
To restore it, you could run:
```bash
git stash apply stash@{2}
# or
git stash pop stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
# Answer
**stash@{2}**
'Work A' is contained in **stash@{2}**.
Since you stashed Work A first, it's the oldest stash entry. Git stash operates as a LIFO (Last In, First Out) stack, so older stashes have higher index numbers. The most recent stash (Work C) is at stash@{0}, while the first stash (Work A) is at stash@{2}.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
# Answer
The stash entry containing 'Work A' is **stash@{2}**.
This is because Git stash uses a stack structure where the most recent stash is at index 0. Since you stashed in the order A → B → C, the stashes are indexed in reverse:
- **stash@{0}**: Work C (most recent)
- **stash@{1}**: Work B
- **stash@{2}**: Work A (oldest)
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
# Answer
**stash@{2}**
'Work A' is in **stash@{2}**.
## Explanation
When you stash items in Git, they stack in LIFO (Last-In-First-Out) order. The most recent stash becomes `stash@{0}`, and previous stashes shift to higher indices:
1. **First stash** (Work A) → pushed to `stash@{2}` after subsequent stashes
2. **Second stash** (Work B) → pushed to `stash@{1}` after Work C stash
3. **Third stash** (Work C) → becomes `stash@{0}` (newest)
Looking at the diff details confirms this:
- `stash@{2}` shows the change: `-Initial content` → `+Work A` ✓
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
# Answer
The stash entry containing 'Work A' is **stash@{2}**.
## Explanation
Git stash operates as a LIFO (Last In, First Out) stack. When you stash items in order:
1. First: 'Work A' → becomes stash@{2} (oldest)
2. Then: 'Work B' → becomes stash@{1}
3. Finally: 'Work C' → becomes stash@{0} (newest)
The stash details confirm this, showing that stash@{2} contains the change `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
# Stash Reference for 'Work A'
**stash@{2}**
## Explanation
Git stash uses a LIFO (Last In, First Out) stack. When you stashed the work in order:
1. Work A stashed → became stash@{0}
2. Work B stashed → became stash@{0}, Work A moved to stash@{1}
3. Work C stashed → became stash@{0}, everything shifted down
The most recent stash (Work C) is at stash@{0}, while the oldest stash (Work A) is at stash@{2}.
You can verify this by the diff content in stash@{2} which shows `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
**`stash@{2}`**
Git stash operates as a **LIFO (Last In, First Out) stack**. Each new stash pushes previous entries to higher indices:
1. 'Work A' stashed first → initially `stash@{0}`
2. 'Work B' stashed second → pushes Work A to `stash@{1}`
3. 'Work C' stashed last → pushes Work A to **`stash@{2}`**, Work B to `stash@{1}`
This is confirmed by the stash details, which show `stash@{2}` contains the diff with `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
## Answer: `stash@{2}`
Git stash operates as a **LIFO (Last In, First Out) stack**, meaning the **most recent** stash always gets index `0`, pushing older stashes to higher indices.
### How the Stack Built Up
| Action | stash@{0} | stash@{1} | stash@{2} |
|---|---|---|---|
| Stash 'Work A' | **Work A** | | |
| Stash 'Work B' | **Work B** | Work A → | |
| Stash 'Work C' | **Work C** | Work B → | Work A → |
Each new stash **pushes** the previous entries down, just like stacking plates.
### Confirmed by the diff output
```
stash@{2}:
-Initial content
+Work A ← 'Work A' lives here (oldest stash)
```
> **Key takeaway:** The *first* thing you stash ends up with the **highest** index, while the *most recent* stash is always `stash@{0}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**`stash@{2}`**
Git stash operates as a **LIFO (Last In, First Out) stack**. Each new stash pushes previous entries down by one index:
1. **'Work A'** stashed first → initially `stash@{0}`, then pushed to `stash@{1}`, then to **`stash@{2}`**
2. **'Work B'** stashed second → initially `stash@{0}`, then pushed to `stash@{1}`
3. **'Work C'** stashed last → sits at **`stash@{0}`** (most recent)
The stash diff for `stash@{2}` confirms it contains `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**`stash@{2}`**
Git stash operates as a **LIFO (Last In, First Out) stack**. Each new stash pushes previous entries down by one index. So the chronological order results in:
| Order Stashed | Content | Stash Reference |
|---------------|---------|-----------------|
| 1st (oldest) | Work A | `stash@{2}` |
| 2nd | Work B | `stash@{1}` |
| 3rd (newest) | Work C | `stash@{0}` |
Since **Work A** was stashed **first**, it was pushed to the bottom of the stack and is found at `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
# Stash Entry Containing 'Work A'
**`stash@{2}`** contains 'Work A'.
## Explanation
Git stash operates as a **stack (LIFO - Last In, First Out)**. Each new stash is pushed onto the top at `stash@{0}`, pushing older stashes down the stack.
Here's how the stack was built:
| Action | stash@{0} | stash@{1} | stash@{2} |
|--------|-----------|-----------|-----------|
| Stashed 'Work A' | Work A | - | - |
| Stashed 'Work B' | Work B | Work A | - |
| Stashed 'Work C' | Work C | Work B | Work A |
Since 'Work A' was stashed **first**, it got pushed to the bottom of the stack at `stash@{2}`, which is confirmed by the diff showing `+Work A` at that position.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}**
Git's stash works like a stack (LIFO - Last In, First Out). Since 'Work A' was stashed first, it got pushed down as newer stashes were added on top:
- `stash@{0}` → Work C (most recent)
- `stash@{1}` → Work B
- `stash@{2}` → Work A (oldest)
This is confirmed by the diff shown for `stash@{2}`, which contains the change adding "Work A" to the file.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**`stash@{2}`**
Git's stash works like a stack (LIFO), where the most recent stash is pushed to the top at `stash@{0}` and older entries get bumped to higher index numbers.
Since you stashed in the order **Work A → Work B → Work C**:
- `stash@{0}` = Work C (most recent)
- `stash@{1}` = Work B
- `stash@{2}` = Work A (oldest)
This is confirmed by the diff for `stash@{2}`, which shows the content being changed to **`Work A`**.
To apply it, you can use:
```bash
git stash apply stash@{2}
# or
git stash pop stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}**
Git stash uses a stack (LIFO). Since 'Work A' was stashed first, it got pushed deepest into the stack. As newer stashes ('Work B', then 'Work C') were added, they took the lower index numbers, pushing 'Work A' down to the highest index.
The diff confirms this: `stash@{2}` shows the change adding `Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}**
Git stash operates as a stack (LIFO — last in, first out). Each new stash is pushed onto the top at `stash@{0}`, shifting older entries to higher index numbers.
Since 'Work A' was stashed **first**, it got progressively pushed down as 'Work B' and 'Work C' were added:
| Order Stashed | Content | Reference |
|---------------|---------|-----------|
| 1st (oldest) | Work A | `stash@{2}` |
| 2nd | Work B | `stash@{1}` |
| 3rd (newest) | Work C | `stash@{0}` |
The stash details confirm this — `stash@{2}` shows the diff adding `Work A`.
To apply it, you could use:
```bash
git stash apply stash@{2}
# or to apply and remove it from the stash list:
git stash pop stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
**`stash@{2}`**
Git's stash works like a stack (LIFO), where the most recent stash is pushed to the top at `stash@{0}` and older entries get bumped to higher indices.
Since 'Work A' was stashed **first**, it's the oldest entry and got pushed down as 'Work B' and 'Work C' were added:
- `stash@{0}` → Work C (stashed last / most recent)
- `stash@{1}` → Work B
- `stash@{2}` → **Work A (stashed first / oldest)** ✅
This is confirmed by the diff for `stash@{2}`, which shows the change to `+Work A`.
To view or restore it:
```bash
git stash apply stash@{2} # apply without removing
git stash pop stash@{2} # apply and remove from stash list
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**`stash@{2}`** contains 'Work A'.
## Why
Git stash works as a **stack (LIFO)**, where the newest stash is always pushed to the top at `stash@{0}` and older entries get shifted to higher indices.
Given your order of operations:
| Order Stashed | Content | Ends up at |
|---------------|---------|------------|
| 1st (oldest) | Work A | `stash@{2}` |
| 2nd | Work B | `stash@{1}` |
| 3rd (newest) | Work C | `stash@{0}` |
This matches the diffs exactly:
- `stash@{0}` → **Work C** (last stashed, top of stack)
- `stash@{1}` → **Work B**
- `stash@{2}` → **Work A** (first stashed, bottom of stack) ✅
You can apply it with:
```bash
git stash apply stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**`stash@{2}`** contains 'Work A'.
## Explanation
Git's stash is a **stack (LIFO)** — new stashes are always pushed onto the top at `stash@{0}`, pushing older entries down to higher indices.
Given your stash order:
| Order Stashed | Content | Stash Reference |
|---------------|---------|-----------------|
| 1st (oldest) | Work A | `stash@{2}` |
| 2nd | Work B | `stash@{1}` |
| 3rd (newest) | Work C | `stash@{0}` |
Since **'Work A' was stashed first**, it got pushed down the stack as 'Work B' and 'Work C' were added on top. This is confirmed by the diff, where `stash@{2}` shows the change adding `+Work A`.
You can retrieve it with:
```bash
git stash apply stash@{2} # applies but keeps the stash
# or
git stash pop stash@{2} # applies and removes the stash
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
## Answer
**`stash@{2}`** contains 'Work A'.
## Explanation
Git stash operates as a **LIFO (Last In, First Out)** stack:
| Stash Reference | Contains | Stash Order |
|----------------|----------|-------------|
| `stash@{0}` | Work C | Stashed **last** (most recent) |
| `stash@{1}` | Work B | Stashed **second** |
| `stash@{2}` | Work A | Stashed **first** (oldest) |
Each new `git stash` pushes existing entries **down** the stack, incrementing their index number. Since 'Work A' was stashed first, it was pushed to `{2}` by the subsequent stashes of Work B and Work C.
This is confirmed by the diff in `stash@{2}` showing:
```diff
-Initial content
+Work A
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
## Answer
**`stash@{2}`** contains 'Work A'.
### Explanation
Git stash operates as a **LIFO (Last In, First Out)** stack:
| Stash Reference | Contains | Stashed Order |
|----------------|----------|---------------|
| `stash@{0}` | Work C | Stashed **last** |
| `stash@{1}` | Work B | Stashed **second** |
| `stash@{2}` | Work A | Stashed **first** |
Since 'Work A' was stashed **first**, it was pushed deepest into the stack, landing at **`stash@{2}`** — the highest index, which always represents the oldest entry.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
## Answer: `stash@{2}`
### Why Git Stash Works This Way
Git stash operates as a **LIFO stack** (Last In, First Out). Each new stash is pushed to the **top** (`stash@{0}`), shifting all existing entries down by one.
| Action | stash@{0} | stash@{1} | stash@{2} |
|---|---|---|---|
| Stash 'Work A' | Work A | — | — |
| Stash 'Work B' | Work B | Work A | — |
| Stash 'Work C' | Work C | Work B | **Work A** |
### Result
```
stash@{0} → Work C (stashed last)
stash@{1} → Work B
stash@{2} → Work A (stashed first, pushed deepest)
```
This is confirmed by the diff in `stash@{2}`:
```diff
-Initial content
+Work A
```
### Key Rule
> **The first item stashed ends up with the highest index number**, as each subsequent stash pushes it further down the stack.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
## Answer
**`stash@{2}`** contains 'Work A'.
## Explanation
Git stash operates as a **LIFO (Last In, First Out)** stack:
| Stash Reference | Contains | Stash Order |
|----------------|----------|-------------|
| `stash@{0}` | Work C | Stashed **last** |
| `stash@{1}` | Work B | Stashed **second** |
| `stash@{2}` | Work A | Stashed **first** |
Each new stash is pushed onto the top of the stack, bumping older entries to higher index numbers. Since **'Work A'** was stashed **first**, it was pushed down to `stash@{2}` as 'Work B' and 'Work C' were added on top.
This is confirmed by the diff in `stash@{2}` showing:
```diff
-Initial content
+Work A
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
## Answer
**`stash@{2}`** contains 'Work A'.
## Explanation
Git stash operates as a **LIFO (Last In, First Out)** stack:
| Order Stashed | Work | Stash Reference |
|--------------|------|-----------------|
| 1st (oldest) | Work A | `stash@{2}` |
| 2nd | Work B | `stash@{1}` |
| 3rd (newest) | Work C | `stash@{0}` |
Each time a new stash is pushed, **existing entries are incremented by 1**, pushing older entries further down the stack. Since 'Work A' was stashed first, by the time 'Work B' and 'Work C' were stashed, it was pushed to index `{2}`.
This is confirmed by the diff in `stash@{2}` showing `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
## Answer: `stash@{2}`
### Explanation
Git stash operates as a **stack (LIFO - Last In, First Out)**:
| Order Stashed | Work | Stash Reference |
|--------------|------|-----------------|
| 1st (oldest) | Work A | `stash@{2}` |
| 2nd | Work B | `stash@{1}` |
| 3rd (newest) | Work C | `stash@{0}` |
Each new `git stash` **pushes** the entry onto the top of the stack, shifting all existing entries **down** by incrementing their index.
```
After stashing Work A: stash@{0} → Work A
After stashing Work B: stash@{0} → Work B, stash@{1} → Work A
After stashing Work C: stash@{0} → Work C, stash@{1} → Work B, stash@{2} → Work A
```
This is confirmed by the diff output showing `stash@{2}` contains `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}** contains 'Work A'.
Git stash acts as a stack (LIFO - Last In, First Out), where the most recently created stash is always at `stash@{0}`. Since 'Work A' was stashed first, it gets pushed deepest into the stack, ending up at the highest index — `stash@{2}` — while 'Work C' (stashed last) sits at `stash@{0}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}** contains 'Work A'.
Since stashes are stored in a LIFO (last-in, first-out) order, the first stash you created ('Work A') ends up at the highest index, while the most recent stash ('Work C') is at `stash@{0}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
**stash@{2}** contains 'Work A'.
Git stash works like a stack (LIFO - Last In, First Out). Since 'Work A' was stashed first, it gets pushed deepest into the stack, ending up at the highest index. As subsequent stashes are added, the earlier ones get shifted to higher indices:
- `stash@{0}` → most recent → **Work C** (stashed last)
- `stash@{1}` → **Work B** (stashed second)
- `stash@{2}` → oldest → **Work A** (stashed first)
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}** contains 'Work A'.
Git stash operates as a stack (LIFO - Last In, First Out), so the order is:
- `stash@{0}` → most recent stash = **Work C**
- `stash@{1}` → **Work B**
- `stash@{2}` → oldest stash = **Work A**
Since 'Work A' was stashed first, it gets pushed to the bottom of the stack and ends up with the highest index, `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry that contains 'Work A' is **stash@{2}**. This is because 'Work A' was stashed first, making it the oldest stash entry in the list, and stash@{2} corresponds to the oldest stash in the git stash list.
The stash entry containing 'Work A' is **stash@{2}**. This is because you stashed 'Work A' first, making it the oldest stash, and in the git stash list, older stashes have higher indices (stash@{2} is older than stash@{1} and stash@{0}). The diff for stash@{2} shows "+Work A", confirming it holds 'Work A'.
The stash entry that contains 'Work A' is **stash@{2}**.
The stash entry that contains 'Work A' is **stash@{2}**.
Based on the providedstash details, the stash entry containing 'Work A' is **stash@{2}**.
Here's why:
1. **stash@{0}** contains the change `+Work C` (Work C).
2. **stash@{1}** contains the change `+Work B` (Work B).
3. **stash@{2}** contains the change `+Work A` (Work A).
Therefore, the stash reference for 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Based on the providedstash list and details:
1. **Stash Order:** The stashes were created in the order `Work A`, `Work B`, `Work C` (oldest to newest).
2. **Stash List Order:** Git lists stashes with the most recent at the top (`stash@{0}`).
3. **Stash Details:**
* `stash@{2}` contains the diff showing `+Work A`.
* `stash@{1}` contains the diff showing `+Work B`.
* `stash@{0}` contains the diff showing `+Work C`.
**Therefore, the stash entry containing 'Work A' is `stash@{2}`.**
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Based on the provided stash list and details, the stash entry containing 'Work A' is **stash@{2}**.
Here's why:
1. **Stash List Order:** The stash list shows the most recent stash at the top (`stash@{0}`) and the oldest at the bottom (`stash@{2}`).
2. **Stash Details:**
* `stash@{0}` contains `Work C`.
* `stash@{1}` contains `Work B`.
* `stash@{2}` contains `Work A`.
3. **User's Stashing Order:** You stated you stashed 'Work A' first, then 'Work B', then 'Work C'. This means 'Work A' was the oldest stash, which corresponds to the bottom entry (`stash@{2}`) in the list.
Therefore, the stash reference for 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Based on the stash list and details provided:
1. **Stash Order:** You stashed 'Work A' first, then 'Work B', then 'Work C'. This means:
* `stash@{0}` is the most recent stash (last stashed: 'Work C')
* `stash@{1}` is the next most recent (stashed: 'Work B')
* `stash@{2}` is the oldest stash (stashed: 'Work A')
2. **Stash Details:** The details for `stash@{2}` show the diff adding `+Work A`.
**Therefore, the stash entry containing 'Work A' is `stash@{2}`.**
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing **Work A** is **stash@{2}**.
This matches the order of stashing: you stashed Work A first, then Work B, then Work C, so the earliest stash (Work A) is at the bottom of the stash stack (`stash@{2}`). The diff for `stash@{2}` shows the change `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
Work A is in **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
`stash@{2}` contains **Work A**.
Because git stash is a stack: the most recent stash is `stash@{0}`, so:
- `stash@{0}` → Work C
- `stash@{1}` → Work B
- `stash@{2}` → Work A
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
stash@{2} contains **Work A**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash" : "stash@{2}" }
Based on the stash list and details, the stash entries are ordered with the most recent stash at the top (stash@{0}).
Since you stashed 'Work A' first, then 'Work B', and then 'Work C', the order from oldest to newest is:
- **stash@{2}**: Work A (oldest, first stashed)
- **stash@{1}**: Work B (second)
- **stash@{0}**: Work C (newest, last stashed)
Therefore, **'Work A' is in stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
stash@{2} contains **Work A**.
Reason: `git stash` uses a stack — the most recent stash is `stash@{0}`. Since you stashed A first, then B, then C, A is the oldest entry at `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
Based on the stash list and the diffs provided:
- **stash@{0}** contains "Work C"
- **stash@{1}** contains "Work B"
- **stash@{2}** contains "Work A"
Since you stashed 'Work A' first, then 'Work B', then 'Work C', the first stash is now at the bottom of the stack (stash@{2}) due to the LIFO (Last In, First Out) nature of the stash.
**'Work A' is in:**
```
stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Work A is in stash@{2}.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
Based on the stash details, 'Work A' is in **stash@{2}**.
The stashes work like a stack where the most recent stash is at index 0. Since you stashed 'Work A' first, then 'Work B', then 'Work C', 'Work A' ended up at the bottom of the stash stack at index 2.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is `stash@{2}`.
When you stash changes, the most recent stash is always `stash@{0}`, and older stashes increment the index. Since you stashed 'Work A' first, it became the oldest, followed by 'Work B' (`stash@{1}`), and finally 'Work C' (`stash@{0}`). The diffs confirm this: `stash@{2}` shows the change to "+Work A".
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**.
Here's why: Git stash operates as a stack, where the most recently stashed changes are at the top. Since you stashed Work A first, then Work B, then Work C, the order in the stash list from most recent (top) to oldest (bottom) is:
- stash@{0}: Work C
- stash@{1}: Work B
- stash@{2}: Work A
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
Based on the stash details provided, 'Work A' is in **stash@{2}**.
This is because when you stash changes, Git places the most recent stashed change at stash@{0}, and older stashes get pushed down the stack. Since you stashed 'Work A' first, then 'Work B', then 'Work C', the order in the stash list is:
- stash@{2}: Work A (first stashed, oldest)
- stash@{1}: Work B (second stashed)
- stash@{0}: Work C (most recent stashed, newest)
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry that contains 'Work A' is `stash@{2}`.
When you stash changes sequentially (first Work A, then Work B, then Work C), Git places the most recent stash at index 0. Since Work A was stashed first, it becomes the oldest entry in the stack and is referenced as `stash@{2}`. The provided stash details confirm this:
- `stash@{0}` contains Work C
- `stash@{1}` contains Work B
- `stash@{2}` contains Work A
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry that contains 'Work A' is:
**`stash@{2}`**
### Explanation:
Git stash operates as a **stack** (Last-In, First-Out). Whenever you create a new stash, it is placed at the top of the stack as `stash@{0}`, and all existing stashes are pushed down:
1. **Stash 'Work A'**: `stash@{0}` contains Work A.
2. **Stash 'Work B'**: `stash@{0}` contains Work B, `stash@{1}` contains Work A.
3. **Stash 'Work C'**: `stash@{0}` contains Work C, `stash@{1}` contains Work B, and **`stash@{2}`** contains Work A.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash reference that contains 'Work A' is:
**`stash@{2}`**
### Explanation:
Git stash operates as a **stack** (Last-In, First-Out). When you stash new work, it is placed at the top of the stack (`stash@{0}`), and all existing stashes are pushed down:
1. **Stash 'Work A':** `stash@{0}` contains Work A.
2. **Stash 'Work B':** `stash@{0}` contains Work B, `stash@{1}` contains Work A.
3. **Stash 'Work C':** `stash@{0}` contains Work C, `stash@{1}` contains Work B, and **`stash@{2}`** contains Work A.
Looking at your provided diffs, the content `+Work A` is explicitly shown under `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash reference that contains 'Work A' is:
**`stash@{2}`**
### Explanation:
Git stash works like a **stack** (Last-In, First-Out). When you stash new work, it is placed at the top of the stack (`stash@{0}`), and all existing stashes are pushed down (their index increases by 1).
1. **Work A** was stashed first. (At that time, it was `stash@{0}`)
2. **Work B** was stashed second. (Work B became `stash@{0}`, Work A moved to `stash@{1}`)
3. **Work C** was stashed last. (Work C became `stash@{0}`, Work B moved to `stash@{1}`, **Work A moved to `stash@{2}`**)
The diff provided for `stash@{2}` confirms this, as it shows the addition of `Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash reference that contains 'Work A' is:
**`stash@{2}`**
**Explanation:**
Git stash works as a **stack** (Last-In, First-Out). When you stash new work, it is placed at the top of the stack as `stash@{0}`, and all existing stashes are pushed down (their index increases).
1. You stashed **Work A** first: It became `stash@{0}`.
2. You stashed **Work B** second: It became `stash@{0}`, and **Work A** moved to `stash@{1}`.
3. You stashed **Work C** third: It became `stash@{0}`, **Work B** moved to `stash@{1}`, and **Work A** moved to `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry containing 'Work A' is **`stash@{2}`**.
**Explanation:**
Git handles stashes like a stack (LIFO - Last In, First Out).
1. When you stashed 'Work A', it was initially `stash@{0}`.
2. When you stashed 'Work B', it became `stash@{0}` and pushed 'Work A' down to `stash@{1}`.
3. When you stashed 'Work C', it became `stash@{0}`, pushing 'Work B' to `stash@{1}` and 'Work A' down to **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**.
**Reasoning:**
Git stashes work like a stack (Last-In-First-Out).
1. You stashed 'Work A' first, which was initially at the top (`stash@{0}`).
2. Then you stashed 'Work B', pushing 'Work A' down to `stash@{1}`.
3. Then you stashed 'Work C', pushing 'Work B' down to `stash@{1}` and 'Work A' down to **`stash@{2}`**.
You can also confirm this by looking at your provided `stash details`, where `stash@{2}` shows the diff adding "Work A".
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
'Work A' is contained in **`stash@{2}`**.
**Why?**
Git stash acts as a stack (LIFO - Last In, First Out). When you stash something, it goes to the top at `stash@{0}`, pushing existing stashed items down to higher indices. Therefore, the first item you stashed ('Work A') is at the bottom of the stack.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry that contains 'Work A' is **stash@{2}**.
In Git, stashes are stored in a stack (Last-In, First-Out). Because you stashed 'Work A' first, it gets pushed further down the list as new stashes ('Work B' at `stash@{1}` and 'Work C' at `stash@{0}`) are added on top of it.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry that contains 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Based on the provided stash details and Git's Last-In, First-Out (LIFO) stack behavior, the earliest stashed item gets pushed further down the list as new items are added.
'Work A' is contained in:
**stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
'Work A' is contained in **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
Based on the stash details and the order they were created, 'Work A' is contained in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
To find which stash entry contains 'Work A', we can look at the stash details provided:
* `stash@{0}` contains **Work C**
* `stash@{1}` contains **Work B**
* `stash@{2}` contains **Work A**
Additionally, this aligns with how Git's stack works (LIFO - Last In, First Out): since you stashed 'Work A' first, followed by 'Work B', and then 'Work C', 'Work A' was pushed to the bottom of the stack.
**Stash reference:** `stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
'Work A' is contained in **`stash@{2}`**.
Here is why: Git uses a stack for stashes (Last-In, First-Out). Because you stashed 'Work A' first, subsequent stashes pushed it further down the stack. 'Work C' (stashed last) is at the top (`stash@{0}`), 'Work B' is in the middle (`stash@{1}`), and 'Work A' (stashed first) is at the bottom (`stash@{2}`). You can also verify this in the diff details provided, where `stash@{2}` shows the change to "Work A".
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
Based on the order you stashed them and the provided stash details, 'Work A' is contained in **`stash@{2}`**.
Here is how the stack works (LIFO - Last In, First Out):
1. Stashed 'Work A' first $\rightarrow$ moved to `stash@{2}`
2. Stashed 'Work B' second $\rightarrow$ moved to `stash@{1}`
3. Stashed 'Work C' third $\rightarrow$ sits at the top in `stash@{0}`
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry that contains 'Work A' is:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry that contains 'Work A' is **`stash@{2}`**.
In Git, the stash works as a stack (Last In, First Out). The work you stashed first ('Work A') is pushed to the bottom of the stack, while the most recently stashed work ('Work C') is at the top (`stash@{0}`).
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry that contains 'Work A' is **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry that contains 'Work A' is **`stash@{2}`**.
### Explanation:
Git stash works as a stack (Last In, First Out). Since you stashed 'Work A' first, it got pushed to the bottom of the stack as newer stashes ('Work B' and then 'Work C') were added on top of it.
This is also confirmed by the diff for `stash@{2}`:
```diff
--- a/file.txt
+++ b/file.txt
@@ -1 +1 @@
-Initial content
+Work A
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash reference that contains 'Work A' is **`stash@{2}`**.
### Explanation:
Git stash works as a Last-In, First-Out (LIFO) stack:
* **`stash@{2}`**: 'Work A' (stashed first, pushed to the bottom of the stack)
* **`stash@{1}`**: 'Work B' (stashed second)
* **`stash@{0}`**: 'Work C' (stashed last, currently at the top of the stack)
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing **'Work A'** is:
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry that contains **'Work A'** is **`stash@{2}`**.
**Explanation:**
Git stash operates on a stack (LIFO - Last In, First Out). Every time you stash new work, it is placed at index `0`, pushing older stashes down:
* `stash@{0}`: Work C (most recent)
* `stash@{1}`: Work B
* **`stash@{2}`: Work A (oldest)**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry that contains 'Work A' is **`stash@{2}`**.
*(Note: Git stash works as a stack/LIFO queue, so the oldest stash moves down the list as newer ones are added).*
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry that contains 'Work A' is **`stash@{2}`**.
**Explanation:**
Git stash operates as a LIFO (Last-In, First-Out) stack. When you create new stashes, older stashes get pushed down the stack and their index increases:
1. 'Work A' was stashed first (`stash@{0}`).
2. 'Work B' was stashed second, moving 'Work A' to `stash@{1}`.
3. 'Work C' was stashed third, moving 'Work B' to `stash@{1}` and 'Work A' to **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
'Work A' is contained in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
'Work A' is contained in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing 'Work A' is **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
**stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
'Work A' is contained in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
According to the provided stash details, 'Work A' is contained in stash entry **stash@{2}**. This entry shows the modification where the content of `file.txt` is changed from "Initial content" to "Work A". Therefore, the stash reference for 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing **'Work A'** is:
**`stash@{2}`**
### Explanation:
Git stash list is ordered with the **most recent stash at index 0** and older stashes increasing in index number. Since you stashed:
- `'Work A'` first → becomes the **oldest** stash → `stash@{2}`
- `'Work B'` second → `stash@{1}`
- `'Work C'` last → `stash@{0}`
The diff for `stash@{2}` shows:
```diff
-Initial content
+Work A
```
✅ Therefore, **`stash@{2}`** contains **'Work A'**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry that contains **'Work A'** is:
```
stash@{2}: WIP on main: 0e54f42 Initial commit
```
**Explanation:**
From your stash details, `stash@{2}` shows the change with `+Work A` in the file. This means it was the last stash you made, and it contains "Work A".
The stash entry containing 'Work A' is `stash@{2}`.
This is determined from the stash details, where `stash@{2}` shows the change from "Initial content" to "Work A", matching the order in which the work was stashed (first Work A, then Work B, then Work C). In Git's stash list, the most recent stash is at index 0, so the oldest stash (Work A) is at index 2.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash"
:
"stash@{2}"
}
The stash containing **Work A** is:
```
stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry that contains **Work A** is:
**stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash that holds **Work A** is:
```
stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash that contains **Work A** is `stash@{2}`. (It’s the oldest stash, showing the diff that changes the line to “Work A”.)
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash that contains **Work A** is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The work “Work A” is in the oldest stash, which is referenced as **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash that contains **Work A** is **stash@{2}**.
# Stash Reference for 'Work A'
`stash@{2}` contains **'Work A'**.
## Explanation
Git stash uses a **stack** (LIFO - Last In, First Out) structure, where the most recently stashed work is always at `stash@{0}`, and older stashes get pushed to higher indices.
Here's the progression:
| Step | Action | stash@{0} | stash@{1} | stash@{2} |
|------|--------|-----------|-----------|-----------|
| 1 | Stash Work A | Work A | — | — |
| 2 | Stash Work B | Work B | Work A | — |
| 3 | Stash Work C | Work C | Work B | Work A |
## Confirmation from the Diff
The `stash@{2}` diff confirms it changes the content from `Initial content` to `Work A`:
```diff
-Initial content
+Work A
```
## To Restore Work A
```bash
git stash pop stash@{2}
```
> ⚠️ **Tip:** Be careful — `git stash pop` on an older stash will reorder the remaining stashes. If you only want to apply without removing, use `git stash apply stash@{2}` instead.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
# Work A Location: `stash@{2}`
## Explanation
Git stash operates as a **LIFO (Last In, First Out) stack**, where the most recently stashed entry occupies the lowest index (`stash@{0}`).
### Stashing Order Mapping
| Stash Order | Work | Reference |
|-------------|------|-----------|
| 1st (first) | Work A | `stash@{2}` |
| 2nd | Work B | `stash@{1}` |
| 3rd (last) | Work C | `stash@{0}` |
### Verification
This is confirmed by inspecting the diff content of each stash entry:
- ✅ `stash@{2}` → `+Work A`
- ✅ `stash@{1}` → `+Work B`
- ✅ `stash@{0}` → `+Work C`
### How to Restore It
To apply Work A to your working directory:
```bash
git stash apply stash@{2}
```
> **Tip:** If you also want to remove it from the stash list after applying, use `git stash pop stash@{2}` instead.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
`stash@{2}` contains 'Work A'.
**Explanation:** Git stash operates as a LIFO (Last In, First Out) stack. Since you stashed Work A first, it was pushed to the bottom of the stack. As you subsequently stashed Work B and Work C, they were placed on top. Therefore:
- `stash@{0}` → Work C (most recent)
- `stash@{1}` → Work B
- `stash@{2}` → Work A (stashed first)
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
`stash@{2}` contains **Work A**.
**Explanation:** Git stores stashes in a stack-like structure where `stash@{0}` is always the most recent entry. Since you stashed in the order Work A → Work B → Work C, they are pushed onto the stack in that sequence:
| Stash Order | Stash Reference | Contents |
|-------------|-----------------|----------|
| Stashed 3rd (most recent) | `stash@{0}` | Work C |
| Stashed 2nd | `stash@{1}` | Work B |
| Stashed 1st (oldest) | `stash@{2}` | **Work A** |
To apply Work A, you would run:
```bash
git stash apply stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entries are stored in a stack-like structure, where the most recent stash is at `stash@{0}` and older stashes have higher numbers.
Since you stashed 'Work A' first, then 'Work B', then 'Work C', the order of stash entries is:
- `stash@{0}`: 'Work C' (most recent)
- `stash@{1}`: 'Work B'
- `stash@{2}`: 'Work A' (oldest)
Therefore, 'Work A' is contained in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash reference for Work A is determined by understanding that `git stash` operates like a stack, where each new stash is placed on top of the previous ones. This means that the most recent stash is at the top of the stack, which is `stash@{0}`. Therefore, the first stash (Work A) would be at the bottom of the stack, which is `stash@{2}`.
Given the details provided, `stash@{2}` contains the changes for Work A.
The stash reference for Work A is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The most recent stash is always listed first in `git stash list`. Since you stashed in the order **Work A → Work B → Work C**, the oldest stash (Work A) will be the **last** in the list.
From the provided details:
- `stash@{0}` contains **Work C**
- `stash@{1}` contains **Work B**
- `stash@{2}` contains **Work A**
Thus, **Work A** is in `stash@{2}`.
**Answer:** `stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash stack works like a LIFO (last-in, first-out) structure. Since you stashed **Work A first**, it is the oldest stash and will be at the **lowest index** in the list.
From the provided details:
- `stash@{0}` contains **Work C** (most recent)
- `stash@{1}` contains **Work B**
- `stash@{2}` contains **Work A** (oldest)
**Answer:**
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entries are ordered from most recent to oldest, with `stash@{0}` being the most recent.
Since you stashed in the order:
1. Work A (first, oldest)
2. Work B
3. Work C (last, most recent)
The stash references would be:
- Work C: stash@{0} (most recent)
- Work B: stash@{1}
- Work A: stash@{2} (oldest)
From the provided details, we can confirm:
- `stash@{2}` contains "Work A"
Therefore, the stash reference for Work A is:
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The order of stashing follows a last-in, first-out (LIFO) stack.
- **First stashed (oldest)**: Work A → appears at the **bottom** of the stack (`stash@{2}`).
- **Second stashed**: Work B → `stash@{1}`.
- **Third stashed (newest)**: Work C → `stash@{0}`.
From the provided details, **`stash@{2}`** contains *Work A*.
**Answer:** `stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing **'Work A'** is:
**`stash@{2}`**
**Explanation:** In Git, stashes are stored as a stack. The most recently stashed work is at index `0` (`stash@{0}`), and each subsequent stash pushes the previous ones down to a higher index. Since you stashed 'Work A' first, it became the oldest entry and was pushed down to the highest index, `stash@{2}`, after 'Work B' (`stash@{1}`) and 'Work C' (`stash@{0}`) were added on top of it.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
`Work A` is contained in **stash@{2}**.
**Why:** Git's stash operates as a LIFO stack (last in, first out). The most recent stash is always at index `0`, and each time you stash new work, the previous entries shift down by one index.
- After stashing **Work A**, it was `stash@{0}`
- After stashing **Work B**, it became `stash@{1}`
- After stashing **Work C**, it became `stash@{2}`
So, `stash@{2}` is the correct reference for **Work A**.
Work A is contained in **stash@{2}**.
JSON Schema
Structured Output
(raw) {
"stash": "Work A is contained in **stash@{2}**."
}
The stash entry that contains **'Work A'** is:
**`stash@{2}`**
**Why:** Git's stash is a LIFO (last-in, first-out) stack. The most recent stash is always at index `0`, pushing older entries to higher indices. Since you stashed 'Work A' first, it is the oldest entry and therefore moved to index `2` after 'Work B' and 'Work C' were stashed on top of it.
stash@{2}
JSON Schema
Structured Output
(raw)
{
"stash": "stash@{2}"
}
**Work A** is in **stash@{2}**.
This follows the LIFO (Last In, First Out) nature of the git stash stack:
- `stash@{0}` always points to the **most recent** stash (Work C)
- Each new stash pushes the previous ones down by one index
- Since Work A was stashed first, it ended up at index 2 after Work B and Work C were subsequently pushed on top of it
Because Git’s stash is a stack, the newest stash is at `stash@{0}` and older stashes get pushed down.
You stashed:
1. Work A → became `stash@{2}`
2. Work B → became `stash@{1}`
3. Work C → became `stash@{0}`
So **“Work A” is in `stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
`Work A` is in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
**Work A** is in **stash@{2}**.
Git’s stash stack is LIFO: the most recently stashed item is `stash@{0}`, so the oldest stash is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
`Work A` is in **stash@{2}**.
Git’s stash is a LIFO stack: the most recently stashed change is `stash@{0}`, the one before that is `stash@{1}`, and the oldest is `stash@{2}`. Since `Work A` was stashed first (before B and C), it ended up at the bottom of the stack.
stash@{2}
JSON Schema
Structured Output
(raw)
{
"stash": "stash@{2}"
}
**Work A** is in **`stash@{2}`**
## Explanation
Git stash operates as a **stack** (Last In, First Out). Each new stash pushes previous entries down the list:
| Stash Order | Reference | Content |
|-------------|-----------|---------|
| 3rd (most recent) | `stash@{0}` | Work C |
| 2nd | `stash@{1}` | Work B |
| 1st (oldest) | `stash@{2}` | **Work A** ✓ |
Since Work A was stashed **first**, it's the oldest entry and sits at the bottom of the stack — confirmed by the diff showing `+Work A` in `stash@{2}`.
To apply it:
```bash
git stash apply stash@{2}
```
⚠️ **Note:** If you `pop` or `drop` entries, the remaining stashes shift indices. Always verify with `git stash list` before referencing by number.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**Work A** is in **`stash@{2}`**.
## Explanation
Git stash works as a **stack** (LIFO — Last In, First Out). Each new stash is pushed to the top, becoming `stash@{0}`, and all existing entries shift down by one.
Here's how the stack evolved as you stashed:
| Action | stash@{0} | stash@{1} | stash@{2} |
|--------|-----------|-----------|-----------|
| Stash Work A | Work A | — | — |
| Stash Work B | Work B | Work A | — |
| Stash Work C | Work C | Work B | **Work A** |
The diffs confirm this:
- `stash@{0}` → `+Work C` (most recent)
- `stash@{1}` → `+Work B`
- `stash@{2}` → `+Work A` (oldest)
To apply Work A, you would run:
```bash
git stash apply stash@{2}
```
> **Tip:** To make stashes easier to identify later, use `git stash push -m "Work A"` so the list shows meaningful messages instead of generic "WIP on main" entries.
**stash@{2}** contains 'Work A'.
**Why:** Git stash operates as a stack (LIFO — Last In, First Out). Each new stash pushes previous entries down:
| Stash Order | Entry After All Stashes |
|---|---|
| Work A (1st) | stash@{2} ← pushed down twice |
| Work B (2nd) | stash@{1} ← pushed down once |
| Work C (3rd) | stash@{0} ← most recent, always at index 0 |
The diffs confirm this: stash@{2} shows `+Work A`, so to restore it you would run:
```bash
git stash apply stash@{2}
```
**stash@{2}** contains 'Work A'.
Git stash operates as a stack (LIFO — last in, first out). Each new stash pushes the previous ones down:
- **stash@{0}** → Work C (stashed last, most recent)
- **stash@{1}** → Work B
- **stash@{2}** → Work A (stashed first, oldest)
The diff confirms this — stash@{2} shows `+Work A`.
To apply it, you'd use:
```bash
git stash apply stash@{2}
```
Or to apply and remove it from the stash list:
```bash
git stash pop stash@{2}
```
⚠️ Note: stash entries are referenced by index, so popping or dropping an entry will renumber the others. If you apply/drop stash@{0} first, for example, Work A's reference would shift from `stash@{2}` to `stash@{1}`.
**stash@{2}** contains Work A.
This is because Git stash operates as a stack (LIFO — last in, first out):
1. **Work A** stashed first → becomes stash@{0}
2. **Work B** stashed next → becomes stash@{0}, pushing Work A down to stash@{1}
3. **Work C** stashed last → becomes stash@{0}, pushing everything down
The oldest stash ends up with the highest index. The diffs confirm this:
| Stash Reference | Content |
|---|---|
| stash@{0} | Work C (most recent) |
| stash@{1} | Work B |
| **stash@{2}** | **Work A (oldest)** |
To apply Work A, you would use:
```bash
git stash apply stash@{2}
```
`stash@{2}` contains **Work A**.
Git stash is LIFO: the first stash (`Work A`) gets pushed down as newer stashes are added, so it ends up at the highest index.
**stash@{2}** contains Work A.
## Explanation
Git stash works as a **stack** (LIFO — Last In, First Out). Each new stash is pushed to the top and takes the reference `stash@{0}`, shifting all existing entries down by one:
| Stash action | stash@{0} | stash@{1} | stash@{2} |
|---|---|---|---|
| Stash Work A | Work A | — | — |
| Stash Work B | Work B | Work A | — |
| Stash Work C | Work C | Work B | **Work A** |
The diffs confirm this: `stash@{2}` shows `+Work A`.
## ⚠️ A practical tip
Since stash indices **shift** whenever you push or drop stashes, relying on raw numbers is fragile. If you plan to keep stashes around, use named stashes:
```bash
git stash push -m "Work A"
git stash list
# stash@{0}: On main: Work A
```
Then you can reference them by name:
```bash
git stash apply stash^{/Work A}
```
Also note: if you `git stash pop stash@{0}`, Work A would move from `stash@{2}` to `stash@{1}` — the reference is positional, not permanent.
**Work A** is in **`stash@{2}`**.
## Explanation
Git stash operates as a **stack (LIFO — Last In, First Out)**. Each new stash is pushed to the top, and all existing entries shift down by one index number:
| Order stashed | Final position |
|---|---|
| Work A (1st) | `stash@{2}` |
| Work B (2nd) | `stash@{1}` |
| Work C (3rd, most recent) | `stash@{0}` |
The diff output confirms this: `stash@{2}` shows `+Work A` in `file.txt`.
## Important caveat
Stash references are **positional, not permanent**. If you pop or drop `stash@{0}`, the remaining entries shift — Work A would then become `stash@{1}`. To reference a specific stash reliably, either:
- Apply it promptly: `git stash apply stash@{2}`
- Or use a named stash instead: `git stash push -m "Work A"` and then find it with `git stash list | grep "Work A"`
**stash@{2}** contains 'Work A'.
Git stash operates as a **stack** (LIFO — Last In, First Out). Each new stash pushes previous entries down:
- **Work A** stashed first → `stash@{2}` (bottom of the stack)
- **Work B** stashed second → `stash@{1}`
- **Work C** stashed last → `stash@{0}` (top, most recent)
This is confirmed by the diffs — `stash@{2}` shows `+Work A`.
**Important caveat:** Stash indices shift when you push or drop stashes. If you `git stash pop` Work C, then Work A becomes `stash@{1}`. For clarity, consider naming stashes with `git stash push -m "Work A"` so entries are identifiable by message rather than position.
The stash entry that contains **‘Work A’** is:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash that contains **'Work A'** is:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry that introduced **“Work A”** is:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
**`stash@{2}`** contains ‘Work A’.
Each stash entry shows the content of **file.txt** after the stash was created:
| Stash entry | Shows |
|-------------|-------|
| `stash@{0}` | …`+Work C` |
| `stash@{1}` | …`+Work B` |
| **`stash@{2}`** | …`+Work A` |
Since the diff for `stash@{2}` ends with **+Work A**, that is the entry that introduced “Work A”. The preceding “Initial content” line is removed, leaving the new line with “Work A”. Hence, the stash you’re looking for is **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash that contains the “Work A” changes is referenced by:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
stash@{2} contains 'Work A', as it shows the change from "Initial content" to "Work A" in file.txt.
Since you stashed 'Work A' first, then 'Work B', then 'Work C', Git's stash behaves like a stack: the most recent stash is at index 0 (`stash@{0}`), and older stashes follow.
So:
- First stash: 'Work A' → becomes `stash@{2}` (oldest, deepest in stack)
- Second stash: 'Work B' → becomes `stash@{1}`
- Third stash: 'Work C' → becomes `stash@{0}` (most recent)
The stash details confirm this:
- `stash@{2}`: shows `+Work A` → correct for first stash
- `stash@{1}`: shows `+Work B` → second
- `stash@{0}`: shows `+Work C` → third (most recent)
Thus, the stash reference containing 'Work A' is:
**stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
`Work A` is in **`stash@{2}`**.
So the stash reference is: **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **`stash@{2}`**.
Git stash entries are listed in reverse order of creation, so the first stash you made ends up at the highest index.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **stash@{2}**.
**Stash reference:** `stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **`stash@{2}`**.
**Stash reference:** `stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}` contains **'Work A'**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
Work A is in **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}` contains **Work A**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}` contains **Work A**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}` contains **Work A**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}` contains **Work A**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`stash@{2}` contains **Work A**.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry that holds **“Work A”** is:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash that holds **“Work A”** is the third (oldest) entry:
**`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash that holds **“Work A”** is the oldest one in the list:
**`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The first stash you made (`Work A`) is the oldest entry, so it’s now at the highest index:
**stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
`stash@{2}` contains “Work A”.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
`Work A` is the oldest stash you created, so it’s kept in the entry at the “bottom” of the list:
```text
stash@{2}
```
So the stash reference for “Work A” is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
`Work A` is in the **third‑most‑recent** stash, so its reference is:
```text
stash@{2}
```
(You can apply it with `git stash apply stash@{2}`.)
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash that holds **Work A** is `stash@{2}`.
Stash @{0} is the most recent (Work C), @{1} is the one before that (Work B), and therefore the oldest entry, @{2}, contains the changes you stashed first (Work A).
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**, as it was the first stash created and is stored at the oldest position in the list. Here's the breakdown:
- **stash@{0}**: Work C (most recent)
- **stash@{1}**: Work B
- **stash@{2}**: Work A (oldest)
**Answer:**
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is **stash@{2}**.
Git's stash follows a LIFO (Last-In, First-Out) structure, where each new stash is added to the top of the stack. Since the stashing order was **Work A → Work B → Work C**, Work C ended up as the most recent stash (stash@{0}), Work B became stash@{1}, and Work A ended up at stash@{2}. This is confirmed by the provided diff details, where `stash@{2}` explicitly shows the change introducing "Work A".
**Answer:**
`stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing 'Work A' is `stash@{2}`.
### Explanation:
- Git stashes are stored in a **stack**, where the most recent stash is at `stash@{0}`, the next at `stash@{1}`, and so on.
- You stashed **Work A first**, then **Work B**, then **Work C**. This order means:
- `stash@{0}` = **Work C** (most recent)
- `stash@{1}` = **Work B**
- `stash@{2}` = **Work A** (oldest/earliest stash)
### Verification of stash details:
- `stash@{2}` explicitly shows the diff replacing `Initial content` with `Work A`, confirming it contains the oldest stashed work ("Work A").
**Answer:**
`stash@{2}` contain Work A.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Based on the provided git stash information, Work A is stored in stash@{2}.
When you stash changes in git, they are stored in a stack-like structure where the most recent stash is assigned index 0 (stash@{0}), and each previous stash increments the index by one. Since you stashed 'Work A' first, then 'Work B', then 'Work C' - 'Work A' would be the oldest stash entry.
Looking at the stash details:
- stash@{0} contains 'Work C' (most recent)
- stash@{1} contains 'Work B' (middle)
- stash@{2} contains 'Work A' (oldest/first stashed)
The stash reference for 'Work A' is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**.
### Explanation:
- Each new stash is added to the top of the stack (`stash@{0}`), pushing older entries upward.
- The order of stashing was: **Work A → Work B → Work C**.
- After stashing:
- `stash@{0}` holds the **most recent** stash (**Work C**).
- `stash@{1}` holds **Work B**.
- `stash@{2}` holds the **oldest** stash (**Work A**).
Thus, **Work A** is stored in `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing 'Work A' is **stash@{2}**.
### Explanation:
- Git stash entries are numbered in **reverse chronological order**, with the most recent stash at `stash@{0}`.
- Since you stashed **Work A first**, it corresponds to the **oldest entry** (`stash@{2}`), while the newer stashes (Work B and Work C) are at `stash@{1}` and `stash@{0}`, respectively.
### Stash Reference:
```
stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is **stash@{2}**.
When you stash items in Git, the most recent stash is listed first (stash@{0}), and older stashes are numbered sequentially. Since you stashed 'Work A' first, it corresponds to the oldest entry, which is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**.
Here's the breakdown:
- **stash@{0}** contains 'Work C' (most recent).
- **stash@{1}** contains 'Work B' (second most recent).
- **stash@{2}** contains 'Work A' (first stashed, oldest entry).
Stash entries are ordered with `stash@{0}` as the newest and higher numbers (e.g., `stash@{2}`) as older entries. Since you stashed 'Work A' first, it appears at the bottom of the list (`stash@{2}`).
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**.
When you stash changes, Git adds each new stash to the top of the list. Since 'Work A' was stashed first, it becomes the oldest entry and is therefore at **stash@{2}** (the bottom of the list). The most recent stash, 'Work C', is at **stash@{0}**, and 'Work B' is at **stash@{1}**.
**Stash reference:** `stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
Based on the stash details provided:
- **stash@{0}** contains **Work C** (most recent)
- **stash@{1}** contains **Work B**
- **stash@{2}** contains **Work A** (oldest)
Since you stashed 'Work A' first, it's stored in **stash@{2}**, which is the oldest stash entry.
**Answer: stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash reference for 'Work A' is `stash@{2}`.
**Explanation:**
When you stash changes, newer stashes are added to the top of the stack. Since you stashed **'Work A' first**, it is the oldest stash and resides at the bottom of the stack, which is `stash@{2}`. The most recent stash (`stash@{0}`) contains the last work you stashed ('Work C'), and `stash@{1}` contains 'Work B'.
The diff for `stash@{2}` confirms this:
```diff
-Initial content
+Work A
```
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
Based on the stash details provided:
- **stash@{0}** contains "Work C" (most recent)
- **stash@{1}** contains "Work B"
- **stash@{2}** contains "Work A" (oldest)
Since you stashed 'Work A' first, it would be at the bottom of the stash stack, which is **stash@{2}**.
**Answer: stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
Looking at the stash entries, I need to match each stash to the work that was stashed:
- **stash@{0}** (most recent): Contains "Work C"
- **stash@{1}**: Contains "Work B"
- **stash@{2}** (oldest): Contains "Work A"
Since you stashed 'Work A' first, it would be the oldest entry in the stash list.
**Answer: Work A is in stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
Based on the stash details provided, I can see that:
- **stash@{0}** contains **Work C** (most recent)
- **stash@{1}** contains **Work B** (middle)
- **stash@{2}** contains **Work A** (oldest)
Since you stashed 'Work A' first, it would be at the bottom of the stash stack.
**Answer:** Work A is in **stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
`stash@{2}`
The stash entry containing 'Work A' is **`stash@{2}`**.
*(Git's stash list operates on a LIFO basis, so the most recent stash is `{0}`, the next is `{1}`, and the oldest pushed stash is `{2}`.)*
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing 'Work A' is **`stash@{2}`**.
**Why:** Git's stash list is ordered newest to oldest, with `stash@{0}` being the most recent. Since you stashed 'Work A' first (making it the oldest entry), it's assigned to `stash@{2}`. The provided diff for `stash@{2}` also explicitly shows the `+Work A` change.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Based on the provided stash details, we can determine the order by examining the content of each stash entry:
* `stash@{0}` contains **"Work C"** (the most recent stash).
* `stash@{1}` contains **"Work B"**.
* `stash@{2}` contains **"Work A"** (the oldest stash in this list).
Since Git stash maintains a LIFO (Last-In, First-Out) order, the first stash you saved (`Work A`) is the deepest in the list (highest index among the visible stashes).
The stash entry that contains 'Work A' is:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
`stash@{2}` contains 'Work A'.
In Git, `stash@{0}` is always the most recently created stash, and each new stash pushes older ones to higher indices. Since 'Work A' was stashed first, it corresponds to the oldest entry in the list, which is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry that contains 'Work A' is **`stash@{2}`**.
This aligns with Git's LIFO (Last-In, First-Out) stash behavior: since you stashed `Work A` first, it sits at the highest index in the stack. The diff details also confirm that `stash@{2}` contains the `+Work A` change.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
**`stash@{2}`**
**Why:** Git treats the stash as a stack, pushing new entries to the top. Since you stashed `Work A` first, it sits at the bottom of the stack (`stash@{2}`). This is also confirmed by the diff, which shows `stash@{2}` changing `file.txt` to `+Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry that contains `'Work A'` is **`stash@{2}`**.
*(Note: Git `stash list` displays entries from newest to oldest, so the first thing you stash ends up with the highest index number.)*
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash reference containing 'Work A' is **`stash@{2}`**.
### Reasoning:
1. **Git Stash Order**: Git stashes are stacked such that `stash@{0}` is the **most recently** created stash, and higher indices (like `stash@{1}`, `stash@{2}`) are older.
2. **Creation Sequence**:
* First: `Work A` → Stored as `stash@{2}` (oldest)
* Second: `Work B` → Stored as `stash@{1}`
* Third: `Work C` → Stored as `stash@{0}` (newest)
3. **Verification via Diff**:
* `stash@{2}` shows the change: `-Initial content` → `+Work A`, confirming it contains "Work A".
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing 'Work A' is `stash@{2}`.
(Git's stash list is a stack where `stash@{0}` is always the most recent, so stashing A, then B, then C places the oldest at the highest index. The provided diff for `stash@{2}` also explicitly confirms it contains `+Work A`.)
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
**stash@{2}**
The stash entry containing 'Work A' is **`stash@{2}`**.
*(Note: Git places the newest stash at `stash@{0}` and pushes older stashes to higher indices. Since you stashed 'Work A' first, it ends up at `stash@{2}`, which directly matches the provided diff showing `+Work A`.)*
'**Work A**' is contained in **`stash@{2}`**.
*(Note: Git always places the most recently stashed item at `stash@{0}`, shifting older stashes to higher indices. Since you stashed 'Work A' first, it sits at the highest number, `stash@{2}`, which also matches the `+Work A` diff shown in the details.)*
Based on the order in which the stashes were created and the content of the diffs:
1. **'Work A'** was stashed **first**.
2. **'Work B'** was stashed **second**.
3. **'Work C'** was stashed **third** (last).
In Git, `stash@{0}` is the most recent stash, `stash@{1}` is the one before that, and `stash@{2}` is the oldest one in the current view.
Since 'Work A' was stashed first (oldest), it corresponds to the highest index number in the stash list.
The stash entry that contains **'Work A'** is:
**stash@{2}**
The stash entry containing 'Work A' is **`stash@{2}`**.
In Git's stash stack, the most recent stash is always at index `{0}`, while older stashes get higher indices. Since you stashed 'Work A' first, it sits at the bottom of this three-entry stack, making it `stash@{2}`. This is also directly confirmed by the diff provided, which shows `+Work A` for that entry.
The stash entry that contains 'Work A' is **`stash@{2}`**.
*(Note: Git stashes operate on a LIFO/stack basis, so the first thing you stash ends up at the highest index as newer stashes are added on top.)*
The stash reference containing `'Work A'` is **`stash@{2}`**.
This matches Git's LIFO (Last-In, First-Out) stacking behavior: the most recent stash lands at index `{0}`, pushing earlier stashes down to higher indices. The provided diff output also directly confirms that `stash@{2}` contains the `+Work A` change.
The stash entry containing 'Work A' is **`stash@{2}`**.
*(Note: Git stashes are stored in a Last-In-First-Out (LIFO) stack. Each new `git stash` command becomes `stash@{0}`, pushing previously stashed entries up by one index. Therefore, the first item you stashed ends up at the highest index number.)*
The stash entry containing `'Work A'` is **`stash@{2}`**.
**Why:** Git adds new stashes to the top of the stack as `stash@{0}`, shifting previously stashed items down by one index each time. Since you stashed in the order A → B → C, the first stash (`Work A`) gets pushed all the way to `stash@{2}`. The provided diffs also confirm this, as `stash@{2}` explicitly shows the `+Work A` change.
The stash entry containing 'Work A' is **stash@{2}**.
**Reasoning:**
1. Git stashes are stacked such that `stash@{0}` is the most recent stash, and higher indices represent older stashes.
2. You stashed in this order:
* First: 'Work A' (Oldest) → Becomes `stash@{2}` after two more stashes are added on top.
* Second: 'Work B' → Becomes `stash@{1}` after one more stash is added on top.
* Third: 'Work C' (Most Recent) → Is at `stash@{0}`.
3. The diff for `stash@{2}` explicitly shows the change from "Initial content" to "+Work A".
The stash entry that contains `'Work A'` is **`stash@{2}`**.
*(Note: Git always places the newest stash at `@{0}` and pushes older stashes to higher indices, so the first stash you made ends up with the highest number.)*
Based on the stash details provided, 'Work A' is contained in **stash@{2}**.
Git stashes operate as a stack (Last-In, First-Out). Since 'Work C' was stashed last, it became `stash@{0}`. 'Work B' was stashed before it, making it `stash@{1}`, and 'Work A' was stashed first, pushing it to the bottom of the current stack at `stash@{2}`.
Based on the stash details provided, **`stash@{2}`** contains 'Work A'.
In Git, stashes are stored in a stack where the most recently stashed changes are placed at the top (`stash@{0}`). Since 'Work C' was stashed last, it became `stash@{0}`, pushing 'Work B' to `stash@{1}` and the first stashed item, 'Work A', to `stash@{2}`.
Based on the order in which the work was stashed and the provided details, Git stores stashes in a Last-In, First-Out (LIFO) stack. This means the most recently stashed item is at index `0`.
- **stash@{0}** contains **Work C** (stashed last)
- **stash@{1}** contains **Work B** (stashed second)
- **stash@{2}** contains **Work A** (stashed first)
The stash reference that contains 'Work A' is **`stash@{2}`**.
Based on the stash details provided, `stash@{2}` contains the change that modifies `file.txt` to `+Work A`.
This aligns with Git's stash behavior: stashes are stored in a stack where the most recently created stash is always `stash@{0}`. Since 'Work C' was stashed last, it sits at index 0; 'Work B' is at index 1; and 'Work A', being stashed first, is at the bottom of the stack.
The stash reference containing 'Work A' is **`stash@{2}`**.
Based on the stash details provided, **`stash@{2}`** contains 'Work A'.
Git stashes operate as a stack (Last-In, First-Out). Since 'Work A' was stashed first, it gets pushed to the bottom of the stack, making it the oldest entry (`stash@{2}`). 'Work C' was stashed last, so it sits at the top of the stack (`stash@{0}`).
stash@{2}
stash@{2}
Based on the provided information and how Git's stash operates as a Last-In-First-Out (LIFO) stack:
1. **Work C** was stashed last, making it the most recent entry: `stash@{0}`
2. **Work B** was stashed second: `stash@{1}`
3. **Work A** was stashed first, making it the oldest entry: `stash@{2}`
The stash reference that contains 'Work A' is **`stash@{2}`**.
Based on the provided details, here is the breakdown:
1. **Git Stash Behavior**: Git stashes are stored in a stack (LIFO - Last In, First Out). The most recent stash is `stash@{0}`, the next most recent is `stash@{1}`, and so on.
2. **Order of Operations**:
* First: 'Work A' was stashed.
* Second: 'Work B' was stashed.
* Third (Most Recent): 'Work C' was stashed.
3. **Mapping to References**:
* `stash@{0}` contains 'Work C' (most recent).
* `stash@{1}` contains 'Work B'.
* `stash@{2}` contains 'Work A' (oldest).
The stash entry containing **'Work A'** is:
**`stash@{2}`**
Based on the stash details provided, the stash entry that contains 'Work A' is:
**`stash@{2}`**
The stash entry that contains 'Work A' is **`stash@{2}`**.
In Git, stashes operate as a stack (Last-In, First-Out). Since you stashed 'Work A' first, then 'Work B', and finally 'Work C', 'Work C' ends up at the top of the stack (`stash@{0}`), pushing the earlier stashes down:
* `stash@{0}` → Work C
* `stash@{1}` → Work B
* `stash@{2}` → Work A
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry that contains **'Work A'** is **`stash@{2}`**.
In Git, `git stash` operates as a stack (last-in, first-out). The most recent stash is `stash@{0}` (Work C), the next is `stash@{1}` (Work B), and the oldest—the first one you created—is `stash@{2}` (Work A).
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The stash entry containing 'Work A' is **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry that contains **'Work A'** is:
**stash@{2}**
Reason: Git stash uses a stack where the most recent stash is `stash@{0}`. Since you stashed Work A first, then B, then C, Work A is the oldest and appears as `stash@{2}`. The stash details confirm `stash@{2}` shows the change to `Work A`.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
`stash@{2}` contains **Work A**.
Since stashes are stored as a stack, the first stash (`Work A`) becomes the oldest entry, referenced as `stash@{2}` when two later stashes (`Work B` and `Work C`) are added on top.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
The earliest stashed change is at the bottom of the stack:
**stash@{2}**
It contains `Work A`. (stash@{1} is Work B, stash@{0} is Work C — the most recent.)
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
'Work A' is in **stash@{2}**.
Because `git stash` pushes onto a stack (LIFO), the first stashed work ('Work A') ends up at the bottom: `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
Because each new stash pushes the previous ones down the stack:
- 1st stash (Work A) → moved to `stash@{2}`
- 2nd stash (Work B) → moved to `stash@{1}`
- 3rd stash (Work C) → at `stash@{0}`
**Work A** is in **`stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The first stashed item, 'Work A', is at the bottom of the stack:
**stash@{2}**
(The most recent stash, 'Work C', is `stash@{0}`; 'Work B' is `stash@{1}`; and the original 'Work A' is `stash@{2}`.)
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
**Work A** is in **`stash@{2}`**.
Git stash works as a stack (LIFO): the first stashed item (`Work A`) ends up at the bottom, and subsequent stashes push newer entries (`Work B`, then `Work C`) on top. Thus:
- `stash@{2}` → Work A (first stash)
- `stash@{1}` → Work B
- `stash@{0}` → Work C (most recent)<|end_message|>
The first stashed item, **'Work A'**, is at the bottom of the stack:
**stash@{2}**
(It was pushed first, so it has the highest index; `stash@{0}` is the most recent — 'Work C'.)
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
Since stashes are stacked with the newest on top:
- `stash@{0}` → Work C (stashed last)
- `stash@{1}` → Work B
- `stash@{2}` → Work A (stashed first)
**Work A is in `stash@{2}`**.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Since stashes are pushed onto a stack (newest first), the first stashed item ends up deepest:
- `stash@{0}` → Work C
- `stash@{1}` → Work B
- `stash@{2}` → Work A
**Answer:** `stash@{2}`
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
Since `git stash` uses a LIFO stack, the most recent stash (`Work C`) is at the top (`stash@{0}`), followed by `Work B` (`stash@{1}`), and the first one (`Work A`) is at the bottom.
**Work A** is in:
```
stash@{2}
```
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
Because Git’s stash stack puts the **most recent** stash at `stash@{0}`:
- `stash@{0}` → Work C (stashed last)
- `stash@{1}` → Work B
- `stash@{2}` → Work A (stashed first)
So **Work A** is in:
**`stash@{2}`**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash": "stash@{2}"}
The stash entries are ordered with the most recent at index `0`. Since you stashed A, then B, then C:
- `stash@{0}` = Work C (most recent)
- `stash@{1}` = Work B
- `stash@{2}` = Work A (oldest)
**Answer:** `stash@{2}` contains 'Work A'.<|end_message|>
Since `git stash` uses a LIFO stack, the most recent stash (`stash@{0}`) is the last one made (`Work C`), followed by `Work B` at `stash@{1}`, and the first one (`Work A`) is the oldest at the bottom.
**Work A is in `stash@{2}`**.
**stash@{2}**
You stashed 'Work A' first, making it the oldest stash entry. In Git, `stash@{2}` is the oldest entry in the list (with higher numbers representing older stashes).
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
The stashes follow a LIFO stack (newest at `stash@{0}`), matching the creation order A→B→C and the provided diffs.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}** contains 'Work A'.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash list is ordered from newest (stash@{0}) to oldest (stash@{2}). Since 'Work A' was stashed first, it is the oldest entry.
stash@{2}
(The diffs confirm this mapping, but the order alone is sufficient to answer.)
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
**stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The Git stash is a LIFO stack: each new `git stash` pushes onto the front, so the most-recently-created entry is always `stash@{0}` and older entries receive successively higher indices.
- First stash → saved “Work A” → becomes `stash@{0}` at that moment.
- Second stash → saved “Work B” → pushes A to `stash@{1}` and becomes the new `stash@{0}`.
- Third stash → saved “Work C” → pushes B to `stash@{1}` and A to `stash@{2}`; C is now `stash@{0}`.
Consequently the entry that still holds “Work A” is `stash@{2}`.
Final answer: stash@{2}
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}**
Git stash is a LIFO stack: the most recent stash is always `stash@{0}`, and earlier ones get higher indices.
You stashed Work A → then Work B → then Work C, so Work A (the oldest) ends up at `stash@{2}` (as confirmed by the provided diffs).
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}**
Git stash operates as a stack (LIFO). Newer stashes are pushed to the top, so:
- First stash (Work A) ends up at the bottom → `stash@{2}`
- Next (Work B) → `stash@{1}`
- Last (Work C) → `stash@{0}`
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}**
Git stash uses a stack (LIFO): recent stashes get lower indices.
- `stash@{0}` = most recent (Work C)
- `stash@{1}` = previous (Work B)
- `stash@{2}` = oldest (Work A, stashed first)
This matches the provided diffs.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
**stash@{2}**
Git stash uses a stack (LIFO). The most recently created stash is always `stash@{0}`, older ones shift to higher indices.
- First stash → Work A → ends up as `stash@{2}`
- Second stash → Work B → ends up as `stash@{1}`
- Third stash → Work C → ends up as `stash@{0}`
This is confirmed by the provided diffs.
stash@{2}
JSON Schema
Structured Output
(raw) {"stash":"stash@{2}"}
The stash entry containing 'Work A' is **stash@{2}**.
**Reasoning:**
In Git, `stash@{0}` is the most recent stash. Therefore, the first action (stashing 'Work A') creates the oldest entry in the list, which is `stash@{2}`.
The stash entry containing 'Work A' is **stash@{2}**.
Since you stashed 'Work A' first, it is the oldest stash in the list (the bottom entry).
The stash entry containing 'Work A' is **stash@{2}**.
**Reasoning:**
Git lists the most recent stashes first. Therefore:
* `stash@{0}` is the most recent (Work C).
* `stash@{1}` is the second most recent (Work B).
* `stash@{2}` is the oldest (Work A).
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
**stash@{2}**
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is **stash@{2}**.
**Reasoning:**
You stashed 'Work A' first. In Git, the most recent stash is always `stash@{0}`. Therefore, the first stash you created becomes the oldest entry in the list, which is `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
'Work A' is located in **stash@{2}**.
Git stashes are ordered in a Last In, First Out (LIFO) manner, meaning the most recently stashed item (Work C) gets index 0, and the oldest stashed item (Work A) gets pushed down to index 2.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
The stash entry containing 'Work A' is **stash@{2}**.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
'Work A' is contained in **stash@{2}**.
Here is why: `git stash` works like a Last-In, First-Out (LIFO) stack. When you stash a new change, it is placed at `stash@{0}`, and all previous stashes are pushed down by one index. Since you stashed 'Work A' first, it has been pushed down to the bottom of the stack by the subsequent stashes of 'Work B' and 'Work C'. The provided diffs confirm that `stash@{2}` contains the changes for "Work A".
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
'Work A' is contained in **stash@{2}**.
Even though you stashed 'Work A' first, Git applies a LIFO (Last-In, First-Out) order to the stash stack. This means the most recently stashed work ('Work C') gets the index `stash@{0}`, pushing the oldest stash ('Work A') down to `stash@{2}`.
stash@{2}
JSON Schema
Structured Output
(raw) { "stash": "stash@{2}" }
'Work A' is contained in **`stash@{2}`**.
Because Git stash works like a stack (Last-In, First-Out), the most recently stashed item ('Work C') gets the index of `0`, pushing the older stashes down. Since 'Work A' was stashed first, it ends up at the bottom of the list at index `2`.
stash@{2}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{2}"
}
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: Let's analyze the situation step by step:
- You stashed **Work A** first.
- Then you stashed **Work B**.
- Then you stashed **Work C**.
The `git stash` command records changes in the order they are made. Each stash is a separate snapshot of your working directory at that point in time.
Looking at your stash details:
```
stash@{0}: WIP on main: 1f2f91d Initial commit
stash@{1}: WIP on main: 1f2f91d Initial commit
stash@{2}: WIP on main: 1f2f91d Initial commit
```
And their contents:
- **stash@{0}**: `+Work C`
- **stash@{1}**: `+Work B`
- **stash@{2}**: `+Work A`
So, **stash@{2}** contains the change for **Work A**.
**Answer:**
The stash entry containing 'Work A' is `stash@{2}`.
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
{2}
JSON Schema
Structured Output
(raw)
{
"stash"
: "{2}"}
Failure: Expected stash reference 'stash@{2}'
Invalid JSON. Output: The stash entry that contains 'Work A' is:
**`stash@{2}`**
*(Git stash works as a stack: each new stash pushes the previous ones down, so the first stash you made ends up at the highest index.)*
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-f7e78679-c7f7-91c5-ae34-6f3a13beb304","request_id":"f7e78679-c7f7-91c5-ae34-6f3a13beb304"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-bbf79ad8-d7b7-9070-a13e-d07e11dc051a","request_id":"bbf79ad8-d7b7-9070-a13e-d07e11dc051a"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-b8ceda8d-c67f-91e3-a1a5-1205f419ea65","request_id":"b8ceda8d-c67f-91e3-a1a5-1205f419ea65"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-524ad54b-6558-95c4-9422-b330626df229","request_id":"524ad54b-6558-95c4-9422-b330626df229"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-fec31d2c-d9e4-90ad-92d5-06306783aed3","request_id":"fec31d2c-d9e4-90ad-92d5-06306783aed3"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-b30358cf-81af-9fba-8414-0ca5dcadb49f"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-a248c667-a254-9579-85bd-fd7f4da5dced"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-b062f6f3-8a94-96dd-9f24-adcb47728d26"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-dd7a6c93-8c3a-982d-bb1e-c3bdf6a4ea8c"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-a7fb5867-277b-9da1-be8a-fa1b2891241f"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-de1b7fcc-5fb2-9159-9526-c6183a257ed2"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-29e6d015-bd7e-9787-ba25-32f69e90ad7c","request_id":"29e6d015-bd7e-9787-ba25-32f69e90ad7c"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-e1533cb1-204f-9063-8d6a-eda1c5a1dff9","request_id":"e1533cb1-204f-9063-8d6a-eda1c5a1dff9"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-2bb3569b-f3f3-906f-8e31-a4fd69938bc3","request_id":"2bb3569b-f3f3-906f-8e31-a4fd69938bc3"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-f79b68a7-fefe-9968-9fa1-1c178dc87470","request_id":"f79b68a7-fefe-9968-9fa1-1c178dc87470"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-43be0233-9f5a-9f07-8536-6a66010ebe08","request_id":"43be0233-9f5a-9f07-8536-6a66010ebe08"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-a705ac21-6286-9da4-9160-944e5cd6ebd6","request_id":"a705ac21-6286-9da4-9160-944e5cd6ebd6"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-cf2c34a6-b69f-9a5e-a277-e532f238d182","request_id":"cf2c34a6-b69f-9a5e-a277-e532f238d182"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-4b1396be-796b-94b6-8255-afd3e070dd2b","request_id":"4b1396be-796b-94b6-8255-afd3e070dd2b"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-c94dae0e-5d61-9748-9c70-acb9c697cb45","request_id":"c94dae0e-5d61-9748-9c70-acb9c697cb45"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-a3cc7baa-2786-9480-b563-51438c44bf6d","request_id":"a3cc7baa-2786-9480-b563-51438c44bf6d"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
Invalid JSON. Output: 'Work A' is in **stash@{2}**.
The stash reference is `stash@{2}` (or `refs/stash@{2}`).{ "stash": "stash@{2}" }
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: **stash@{2}**
Since `git stash` pushes each new stash onto index `0`, the order is reversed:
- `stash@{0}` = Work C (last stashed)
- `stash@{1}` = Work B
- `stash@{2}` = Work A (first stashed){ "stash": "stash@{2}" }
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: Since Git stash uses a LIFO stack, the most recent stash (`Work C`) is `stash@{0}`, the next (`Work B`) is `stash@{1}`, and the oldest (`Work A`) is at the bottom.
**Work A is in `stash@{2}`**.
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)