Stash apply vs pop distinction
Tests ability to distinguish between stash apply and stash pop semantics. Evaluates understanding of stash consumption behavior.
Baseline Repository
These commands set up the repo before the model sees the prompt. They define the starting file structure, staged changes, and Git history.
- 01
git init - 02
git config user.email 'test@test.com' - 03
git config user.name 'Test User' - 04
echo 'Initial' > file.txt - 05
git add file.txt - 06
git commit -m 'Initial' - 07
echo 'Work to keep' > file.txt - 08
git stash push -m 'keep-this' - 09
echo 'Another work' > file.txt - 10
git stash push -m 'another'
Prompt
You stashed 'Work to keep' with message 'keep-this', then stashed another work. You want to apply 'keep-this' but not remove it from the stash list. Which stash entry contains 'keep-this'? Provide the stash reference.
Expected
stash@{1}
Fixture Metrics
Scoped model quality, cost, API time, and token usage for stash_recovery/f009.
Loading...
Raw Attempt Evidence
Loading raw attempt evidence…
Model Outputs (546)
The 'keep-this' stash is **`stash@{1}`**.
You can confirm this from the stash list — `stash@{1}: On main: keep-this` — and its diff shows the change `+Work to keep`, matching the work you wanted to preserve. (Stashes are stacked, so the most recent stash "another" pushed 'keep-this' down to index 1.)
To apply it **without removing it** from the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
`git stash apply` restores the changes but keeps the entry in the stash list, whereas `git stash pop` would apply and then delete it.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The 'keep-this' stash is at **`stash@{1}`**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
(`git stash apply` keeps the entry in the list, unlike `git stash pop`, which would delete it after applying.)
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
## Answer: `stash@{1}`
The stash entry containing 'keep-this' is **`stash@{1}`**.
### Why
Git stashes work as a **stack** (LIFO — last in, first out). Since you stashed 'keep-this' *first* and 'another' *second*, the more recent stash pushed 'keep-this' down:
- `stash@{0}` → "another" (most recent)
- `stash@{1}` → "keep-this" (older)
This is confirmed by the diff for `stash@{1}`, which contains the `Work to keep` change.
### Command to apply without removing it
```bash
git stash apply stash@{1}
```
Use **`apply`** (not `pop`) — `apply` restores the changes to your working directory but **keeps the entry in the stash list**, whereas `git stash pop` would apply *and* delete it.
> **Note:** In some shells (like zsh or PowerShell), you may need to quote the reference: `git stash apply "stash@{1}"`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is:
**`stash@{1}`**
The most recent stash gets `stash@{0}`, so since you stashed 'keep-this' first and 'another' second, 'keep-this' was pushed down to `stash@{1}`.
To apply it **without removing it** from the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
- `git stash apply` — applies the changes but keeps the entry in the stash list ✅
- `git stash pop` — applies the changes but **deletes** the entry (not what you want here)
You can verify it stays in the list afterward with `git stash list`.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is:
## `stash@{1}`
**Why:** Git stashes work like a stack — the most recent stash is `stash@{0}`. Since you stashed 'keep-this' *first* and then stashed 'another' work, 'keep-this' got pushed down to position `{1}`. This is confirmed by:
- The stash list: `stash@{1}: On main: keep-this`
- The diff for `stash@{1}` showing the change `+Work to keep`
**Command to apply it without removing it from the stash list:**
```bash
git stash apply stash@{1}
```
> **Note:** Use `git stash apply` (not `git stash pop`) — `apply` restores the changes but keeps the entry in the stash list, while `pop` would apply *and* delete it.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
# Answer
The stash entry containing 'keep-this' is:
**stash@{1}**
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
This applies the stashed changes while keeping the entry in your stash list. (If you used `git stash pop stash@{1}` instead, it would remove the entry after applying it.)
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
# Answer
The stash entry containing 'keep-this' is **`stash@{1}`**
## To apply it without removing from stash:
```bash
git stash apply stash@{1}
```
This will apply the changes from stash@{1} while keeping it in your stash list.
**Key differences:**
- `git stash apply stash@{1}` - applies changes, **keeps** the stash entry
- `git stash pop stash@{1}` - applies changes, **removes** the stash entry
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
# Stash Reference
The stash entry containing 'keep-this' is: **`stash@{1}`**
## To Apply Without Removing
To apply this stash without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
**Key difference:**
- `git stash apply` - applies the changes but keeps the stash
- `git stash pop` - applies the changes and removes the stash
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
# Answer
The stash entry containing 'keep-this' is **`stash@{1}`**
## To apply it without removing it from the stash list:
```bash
git stash apply stash@{1}
```
This command will apply the changes from `stash@{1}` to your working directory while keeping it in the stash list. If you used `git stash pop` instead, it would remove the entry after applying it.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
# Answer
The stash entry containing 'keep-this' is: **`stash@{1}`**
## To apply it without removing from the stash list:
```bash
git stash apply stash@{1}
```
This will apply the changes but keep the stash entry in your stash list, which is what you want.
(Note: `git stash pop stash@{1}` would apply AND remove it, so use `apply` instead of `pop`)
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash reference containing 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
**Explanation:** Git's stash works as a **LIFO (last in, first out) stack**. Since 'keep-this' was stashed **first** and 'another' was stashed **after**, 'keep-this' was pushed down to `stash@{1}` while 'another' occupies `stash@{0}` (the most recent). Using `git stash apply` (as opposed to `git stash pop`) applies the changes **without removing** the entry from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Stash Reference for 'keep-this'
The stash entry containing 'keep-this' is:
**`stash@{1}`**
Git's stash works like a **stack** (last in, first out). Since 'keep-this' was stashed **first** and 'another' was stashed **after**, 'keep-this' was pushed down to index 1.
To apply it **without removing** it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
> **Key distinction:** `git stash apply` keeps the entry in the stash list, while `git stash pop` would apply **and** remove it.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash reference containing 'keep-this' is **`stash@{1}`**.
Since 'keep-this' was stashed **first** and 'another' was stashed **after** it, the newer stash pushed the older one down the stack. Git's stash list works like a **LIFO (Last In, First Out) stack**, so:
- `stash@{0}` → most recent stash ("another")
- `stash@{1}` → older stash ("keep-this")
To apply it **without removing** it from the stash list, you would run:
```bash
git stash apply stash@{1}
```
Using `apply` (instead of `pop`) ensures that the stash entry remains in the stash list for future use.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash reference containing 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
**Explanation:** Git's stash works as a **LIFO (last in, first out) stack**. Since 'keep-this' was stashed **first** and 'another' was stashed **after** it, 'keep-this' was pushed down to `stash@{1}` while 'another' sits at the top as `stash@{0}`. Using `git stash apply` (as opposed to `git stash pop`) ensures the entry remains in the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
# Answer: `stash@{1}`
## Identification
Looking at the stash list:
```
stash@{0}: On main: another ← the second (most recent) stash
stash@{1}: On main: keep-this ← the one you want
```
Stashes are stored in **LIFO order**, so the newer stash (`another`) pushed the original `keep-this` down to index `{1}`.
Confirmation via the diff — `stash@{1}` shows `+Work to keep`, matching the message `keep-this`.
## Command to Use
Since you want to **apply but preserve** the stash entry, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
| Command | Effect |
|---------|--------|
| `git stash apply stash@{1}` | ✅ Applies changes, **keeps** entry in stash list |
| `git stash pop stash@{1}` | ❌ Applies changes, **removes** entry from stash list |
After running `git stash apply stash@{1}`, verify it's still there:
```bash
git stash list
# stash@{0}: On main: another
# stash@{1}: On main: keep-this ← still present
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Answer
The stash entry containing 'keep-this' is:
```
stash@{1}
```
## Explanation
Since stashes work like a stack (LIFO), your **second** stash ("another work") became `stash@{0}` and pushed your **first** stash ("keep-this") down to `stash@{1}`.
The stash details confirm this:
- **`stash@{0}`** → contains `+Another work` (message: "another")
- **`stash@{1}`** → contains `+Work to keep` (message: "keep-this") ✓
## Applying Without Removing
To apply the stash **without** removing it from the stash list, use `git stash apply` (not `git stash pop`):
```bash
git stash apply stash@{1}
```
| Command | Applies changes | Removes from stash list |
|---------|:---------------:|:-----------------------:|
| `git stash apply` | ✓ | ✗ |
| `git stash pop` | ✓ | ✓ |
Using `apply` keeps `stash@{1}` intact so you can reuse it later.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The `keep-this` stash is **`stash@{1}`**.
You can confirm this from the details:
- `stash@{1}` shows the change `+Work to keep`, which matches the "Work to keep" content you stashed with the message `keep-this`.
- `stash@{0}` is the later "another" stash (`+Another work`).
To apply it **without removing** it from the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
- `git stash apply` → applies the changes but **keeps** the entry in the stash list.
- `git stash pop` → applies the changes and **removes** the entry (which you want to avoid here).
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**`stash@{1}`**
## Why
The stash list shows the most recent stash on top (index 0), so the ordering is reverse-chronological:
```
stash@{0}: On main: another ← stashed second (most recent)
stash@{1}: On main: keep-this ← stashed first
```
Since you stashed `'Work to keep'` with message `'keep-this'` **first**, then stashed the other work **second**, the newer stash pushed `keep-this` down to index `1`.
The stash details confirm this: `stash@{1}` contains the `+Work to keep` change, matching your `'keep-this'` message.
## Applying without removing it
To apply it while **keeping** it in the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
- `git stash apply` → applies the changes but **leaves the entry** in the stash list ✅
- `git stash pop` → applies the changes but **removes the entry** from the list ❌ (not what you want here)
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
## Answer
The **`keep-this`** work is in **`stash@{1}`**.
### Verification
Looking at the stash list:
```
stash@{1}: On main: keep-this
```
And confirming via the diff details, `stash@{1}` contains the change:
```
-Initial
+Work to keep
```
This matches your "Work to keep" content saved with the message `keep-this`. ✅
(`stash@{0}` is the later "another" work you stashed on top.)
### To apply it *without* removing it from the stash list
Use **`git stash apply`** (not `git stash pop`):
```bash
git stash apply stash@{1}
```
| Command | Applies changes | Removes from stash list |
|---------|:--------------:|:-----------------------:|
| `git stash apply stash@{1}` | ✅ | ❌ (kept) |
| `git stash pop stash@{1}` | ✅ | ✅ (deleted) |
Since you want to **keep** the entry in the stash list, `git stash apply stash@{1}` is the correct choice.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing 'keep-this' is:
**`stash@{1}`**
## Explanation
Looking at the stash list and details:
- `stash@{1}` has the message `keep-this` and its diff shows `+Work to keep` — this is your target.
- `stash@{0}` is the more recent "another" work.
## To apply without removing it from the stash list
Use `git stash apply` (not `git stash pop`), since `apply` leaves the entry in the stash list, while `pop` removes it:
```bash
git stash apply stash@{1}
```
This applies the "Work to keep" changes to your working directory while keeping `stash@{1}` intact in the stash list for later use.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Answer
**`stash@{1}`** contains the 'keep-this' work.
### Reasoning
Looking at the stash list and details:
- **`stash@{0}`** — message `another`, diff shows `+Another work`
- **`stash@{1}`** — message `keep-this`, diff shows `+Work to keep` ✅
Since you stashed 'Work to keep' *first* (with message `keep-this`), then stashed 'another work' *second*, the newer stash sits at index `0`, pushing your original stash down to index `1`. The diff confirms it: `stash@{1}` contains `Work to keep`.
### How to apply it without removing it
Use **`git stash apply`** (not `git stash pop`), because:
- `git stash apply` → applies the changes but **keeps** the entry in the stash list
- `git stash pop` → applies the changes and **removes** the entry
```bash
git stash apply stash@{1}
```
This restores 'Work to keep' into your working tree while leaving `stash@{1}` intact in the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
## Identifying and Applying the Stash
### The Stash Entry
`stash@{1}` contains **'keep-this'**, as shown in the stash list:
```
stash@{0}: On main: another ← most recent stash
stash@{1}: On main: keep-this ← this is what we want
```
> **Note:** Stashes are indexed like a stack — `{0}` is always the **most recent**, so the second stash pushed becomes `{1}`.
---
### Command to Apply Without Removing
```bash
git stash apply stash@{1}
```
#### `apply` vs `pop` — Key Difference
| Command | Applies Changes | Removes from Stash List |
|---|---|---|
| `git stash pop stash@{1}` | ✅ | ✅ |
| `git stash apply stash@{1}` | ✅ | ❌ |
---
### Verification
After running `git stash apply stash@{1}`, the stash list remains **unchanged**:
```bash
git stash list
# stash@{0}: On main: another
# stash@{1}: On main: keep-this ← still here
```
And your working directory will reflect the **"Work to keep"** changes:
```diff
-Initial
+Work to keep
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Identifying and Applying the Stash
### The Stash Entry
`stash@{1}` contains **'keep-this'**
```
stash@{1}: On main: keep-this
```
### Command to Apply Without Removing
```bash
git stash apply stash@{1}
```
### Key Distinction
| Command | Applies Stash | Removes from List |
|---------|--------------|-------------------|
| `git stash pop stash@{1}` | ✅ | ✅ |
| `git stash apply stash@{1}` | ✅ | ❌ |
`git stash apply` applies the changes but **keeps `stash@{1}` in the stash list**, which is exactly what you need to preserve 'keep-this' for future use.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Identifying the Stash Entry
### Stash Reference
```
stash@{1}
```
### Explanation of Stash Order
```
stash@{0}: On main: another ← most recent stash (pushed last)
stash@{1}: On main: keep-this ← older stash (pushed first)
```
Git stash works like a **stack (LIFO)** — the last stash pushed gets index `{0}`, pushing the original down to `{1}`.
---
### Command to Apply Without Removing
```bash
git stash apply stash@{1}
```
### `apply` vs `pop` Comparison
| Command | Applies Changes | Removes from Stash List |
|---------|----------------|------------------------|
| `git stash pop stash@{1}` | ✅ | ✅ |
| `git stash apply stash@{1}` | ✅ | ❌ |
---
### Verify It's Still in the List After Applying
```bash
git stash list
# stash@{0}: On main: another
# stash@{1}: On main: keep-this ← still present
```
Using `apply` instead of `pop` is useful when you want to **apply the same stash to multiple branches** or keep it as a safety backup.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Identifying the Stash Entry
Based on the `git stash list` output, the **'keep-this'** stash is:
```
stash@{1}: On main: keep-this
```
## Applying Without Removing
To apply `stash@{1}` while **keeping it in the stash list**, use `git stash apply` (not `git stash pop`):
```bash
git stash apply stash@{1}
```
## Key Difference: `apply` vs `pop`
| Command | Applies Stash | Removes from List |
|---------|--------------|-------------------|
| `git stash pop stash@{1}` | ✅ | ✅ Yes (destructive) |
| `git stash apply stash@{1}` | ✅ | ❌ No (keeps it) |
## Verification
After running `git stash apply stash@{1}`, you can confirm:
```bash
# Check working directory has the change
git diff
# Output: +Work to keep
# Confirm stash is still listed
git stash list
# stash@{0}: On main: another
# stash@{1}: On main: keep-this ← still present ✅
```
The stash reference is **`stash@{1}`**, and using `git stash apply` ensures it remains in the stash list after being applied.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Identifying the Stash Entry
Based on the stash list, **`stash@{1}`** contains the 'keep-this' message with the "Work to keep" changes.
```
stash@{1}: On main: keep-this
```
## Applying Without Removing
To apply this stash while **keeping it in the stash list**, use `git stash apply` (not `git stash pop`):
```bash
git stash apply stash@{1}
```
## Key Difference
| Command | Applies Changes | Removes from Stash List |
|---------|----------------|------------------------|
| `git stash pop stash@{1}` | ✅ Yes | ✅ Yes |
| `git stash apply stash@{1}` | ✅ Yes | ❌ No |
## Verification
After running `git stash apply stash@{1}`, you can confirm:
```bash
# Check the stash list - stash@{1} should still be present
git stash list
# Verify the changes were applied
git diff
```
```
# Expected output of git diff:
-Initial
+Work to keep
```
`stash@{1}` remains in the stash list after applying, allowing you to reuse or reference it later.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
## Identifying and Applying the Stash
### The Stash Entry
`stash@{1}` contains **'keep-this'**
```
stash@{1}: On main: keep-this
```
---
### Command to Apply Without Removing
```bash
git stash apply stash@{1}
```
### Why `apply` and not `pop`?
| Command | Applies Changes | Removes from Stash List |
|---------|----------------|------------------------|
| `git stash pop stash@{1}` | ✅ | ✅ |
| `git stash apply stash@{1}` | ✅ | ❌ |
`git stash apply` leaves the entry intact in the stash list, so `stash@{1}` remains available for future use.
---
### Verification
After running `git stash apply stash@{1}`, the stash list remains unchanged:
```bash
$ git stash list
stash@{0}: On main: another
stash@{1}: On main: keep-this # ✅ Still here
```
And `file.txt` will now contain:
```
Work to keep
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
This entry contains the diff changing `file.txt` to "Work to keep," matching the stash created with the message 'keep-this'. To apply it without removing it from the stash list, use:
```
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**stash@{1}** contains 'keep-this'.
To apply it without removing it from the stash list, use:
```
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
**stash@{1}** contains the 'keep-this' stash entry.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
(Using `apply` instead of `pop` preserves the stash entry in the list, whereas `pop` would apply the changes and then delete the entry.)
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
The stash entry containing 'keep-this' is **stash@{1}**. To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
The stash entry that contains 'keep-this' is **stash@{1}**. To apply it without removing it from the stash list, use the command:
```bash
git stash apply stash@{1}
```
The stash entry that contains 'keep-this' is **stash@{1}**. This is the second entry in the stash list, with the message "keep-this" and the diff showing "Work to keep". To apply it without removing it from the stash list, you can use `git stash apply stash@{1}`.
Based on the provided Git stash list and details, the stash entry containing 'keep-this' is:
**stash@{1}**
### Explanation:
1. **Stash List Order**: Git lists stashes in chronological order, with the most recent at `stash@{0}`.
2. **Stash Details**:
- `stash@{0}`: Message "another" (contains changes to `file.txt` from `-Initial` to `-Another work`).
- `stash@{1}`: Message "keep-this" (contains changes to `file.txt` from `-Initial` to `-Work to keep`).
Since `stash@{1}` explicitly matches the message "keep-this", it is the correct reference. Applying this stash (`git stash apply stash@{1}`) will restore its changes but **not** remove it from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
Based on the provided Gitstash list and details, the stash entry containing 'keep-this' is:
**stash@{1}**
Here's why:
1. **Stash List Order:** The list shows `stash@{0}: On main: another` and `stash@{1}: On main: keep-this`.
2. **Stash Details:** The details for `stash@{1}` explicitly show the diff message `+Work to keep` and the stash message `keep-this`.
3. **User's Action:** You stashed 'Work to keep' with the message 'keep-this' first, then stashed another work. This means the 'keep-this' stash is the *second* stash you created, hence `stash@{1}`.
Therefore, to apply `stash@{1}` (the 'keep-this' stash) while keeping it in the stash list, you would use the reference `stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entrycontaining 'keep-this' is **stash@{1}**.
**Explanation:**
1. The stash list shows two entries:
- `stash@{0}: On main: another`
- `stash@{1}: On main: keep-this`
2. The stash details confirm `stash@{1}` has the diff for `Work to keep` (changes `file.txt` from `-Initial` to `+Work to keep`).
3. To apply `keep-this` **without removing it** from the stash list, use:
```bash
git stash apply stash@{1}
```
This applies the changes but leaves `stash@{1}` in the list.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
Basedon the provided stash list and details, the stash entry containing 'keep-this' is **stash@{1}**.
Here's why:
1. **Stash List Order:** The list shows `stash@{0}` and `stash@{1}`.
2. **Stash Details:** The details for `stash@{1}` explicitly state the message: `On main: keep-this`.
3. **Content Match:** The diff in `stash@{1}` changes `file.txt` from `-Initial` to `+Work to keep`, matching the description of the 'Work to keep' stash.
**Stash Reference:** `stash@{1}`
**Command to Apply it (keeping it in the list):**
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing **“keep-this”** is:
`stash@{1}`
To apply it **without removing it** from the stash list, use:
```bash
git stash apply stash@{1}
```
This applies the changes but keeps the stash entry intact.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash" : "stash@{1}" }
The stash entry containing **'keep-this'** is **`stash@{1}`**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The `keep-this` stash is in:
```text
stash@{1}
```
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash" : "stash@{1}"}
The stash entry containing `keep-this` is **`stash@{1}`**.
Git lists stashes with the most recent at index 0. Since you stashed `keep-this` first, then stashed another work, `keep-this` became `stash@{1}`. To apply it without removing it from the stash list, you would use:
```
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **stash@{1}**.
To apply it without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
This applies the changes from that stash while keeping it in the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry containing **“keep-this”** is:
```text
stash@{1}
```
To apply it **without removing** it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1} contains 'keep-this'.
Use:
git stash apply stash@{1}
This will apply it without removing it from the stash list.
JSON Schema
Structured Output
(raw) { "stash": "stash@{1} contains 'keep-this'.\n\nUse:\n\ngit stash apply stash@{1}\n\nThis will apply it without removing it from the stash list." }
The stash entry containing "keep-this" is `stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stashentry containing the message 'keep-this' is `stash@{1}`.
The stash entry containing the message "keep-this" is `stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
Based on the stash list and details you provided, the stash entry containing "keep-this" is:
```
stash@{1}
```
To apply this stash without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
This applies the changes from `stash@{1}` to your working directory while keeping the stash entry intact for potential future use.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is `stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry that contains the message "keep-this" is:
```
stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry with the message "keep-this" is `stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing the message **keep-this** is `stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
Based on the git stash list provided, the stash entry that contains "keep-this" is:
**stash@{1}**
This entry has the message "keep-this" and contains the changes you want to apply (the file shows "+Work to keep" as the modification).
To apply this stash without removing it from the stash list, you would use:
```
git stash apply stash@{1}
```
This will apply the changes from "keep-this" to your working directory while keeping stash@{1} in the stash list for future use.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing the 'keep-this' message is `stash@{1}`. This is the older stash, as shown in the stash list where `stash@{1}` has the description "On main: keep-this" and its diff includes the change `+Work to keep`.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash reference containing the message 'keep-this' is:
**`stash@{1}`**
To apply these changes without removing them from the stash list, you would use the command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash reference for the entry containing 'keep-this' is:
**`stash@{1}`**
To apply this stash without removing it from the list, you would use the command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing the message 'keep-this' is **`stash@{1}`**.
To apply these changes without removing them from your stash list, use the following command:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry that contains the message 'keep-this' is:
**`stash@{1}`**
To apply this stash without removing it from the list, you would run:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing 'keep-this' is **`stash@{1}`**.
To apply this stash without removing it from your stash list, use the following command:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **`stash@{1}`**.
To apply the changes from `stash@{1}` and keep it in the stash list, use the following command:
```bash
git stash apply stash@{1}
```
**Explanation:**
* `git stash apply` applies the changes to your working directory but does not remove the entry from the stash list.
* `git stash pop` (by contrast) would apply the changes and immediately remove the entry from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **`stash@{1}`**.
To apply this stash without removing it from your stash list, use the following command:
```bash
git stash apply stash@{1}
```
**Why:** `git stash apply` merges the changes from the stash into your working directory but leaves the stash entry intact, whereas `git stash pop` would have deleted it after applying.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is **`stash@{1}`**.
To apply this stash without removing it from the stash list, use the following command:
```bash
git stash apply stash@{1}
```
**Why this command?**
* **`apply`**: Re-applies the stash changes to your working directory but leaves the stash entry in the list.
* **`pop`** (which you should **avoid** here): Applies the changes *and* immediately removes the entry from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash reference containing 'keep-this' is **`stash@{1}`**.
To apply it without removing it from your stash list, you would use the following command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry that contains your 'keep-this' work is:
`stash@{1}`
To apply this stash without removing it from the stash list, you would use:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is:
**stash@{1}**
To apply this stash without removing it from your stash list, you would use the command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry that contains 'keep-this' is **`stash@{1}`**.
To apply this stash without removing it from your stash list, you should use the `apply` command instead of `pop`:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash reference that contains 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, you would run:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is **`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash reference that contains 'keep-this' is:
**`stash@{1}`**
To apply this stash without removing it from your stash list, you can use the following command:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry that contains 'keep-this' is:
**`stash@{1}`**
To apply this stash without removing it from the stash list, you would use the following command:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry that contains 'keep-this' is **`stash@{1}`**.
To apply this stash without removing it from your stash list, you can use the following command:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains 'keep-this' is **`stash@{1}`**.
To apply this stash without removing it from your stash list, use the `apply` command:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry that contains 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, you can run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is **`stash@{1}`**.
To apply this stash without removing it from the stash list, you can use the command:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, you can use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash reference that contains 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, you would run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry that contains 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing 'keep-this' is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains 'keep-this' is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains 'keep-this' is:
**`stash@{1}`**
The stash entry containing 'keep-this' is **`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is **`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash reference that contains 'keep-this' is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash reference that contains 'keep-this' is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash reference that contains 'keep-this' is **`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash reference is: **`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash reference containing 'keep-this' is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry that contains the message **'keep-this'** is **stash@{1}**.
**Stash reference:** `stash@{1}`
This entry includes the message "keep-this" in its description and the relevant changes to the file content. Since you want to apply this stash without removing it from the stash list, you would use the command:
```sh
git stash apply stash@{1}
```
This command will apply the changes from `stash@{1}` while leaving the stash entry intact in the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry that contains the message **'keep-this'** is **stash@{1}**.
Since you want to apply this stash **without removing it** from the stash list, you should use:
```bash
git stash show stash@{1} # to view details (optional)
git stash apply stash@{1} # to apply without popping
```
✅ **Stash reference containing 'keep-this':** `stash@{1}`
✅ **Command to apply without removing:** `git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
Let's break down your question and analyze the Git stash entries:
### Your situation:
- You stashed `'Work to keep'` with message `'keep-this'`.
- Then you made another change (another "work").
- Now, you want to **apply** `'keep-this'` (i.e., reapply those changes), **but do not remove** that stash entry from your stash list.
### The stash list you provided:
```
stash@{0}: On main: another
stash@{1}: On main: keep-this
```
So, `stash@{1}` is the one with the message `'keep-this'`.
### Stash details:
- **stash@{1}** contains the changes from when you ran:
```
git stash
```
after making the change "Work to keep".
#### The actual content of `stash@{1}`:
```
diff --git a/file.txt b/file.txt
index a77fa51..c61acfb 100644
--- a/file.txt
+++ b/file.txt
@@ -1 +1 @@
-Initial
+Work to keep
```
This means `stash@{1}` contains the changes from when you did:
```
git stash
```
after making the change "Work to keep".
### To answer your question:
> Which stash entry contains 'keep-this'?
**The stash entry is:**
`stash@{1}: On main: keep-this`
---
**If you want to apply this stash without removing it from your stash list, use:**
```sh
git stash apply stash@{1}
```
---
**Summary:**
**The stash entry containing 'keep-this' is:**
`stash@{1}`
The stash entry with the message **“keep‑this”** is:
```
stash@{1}
```
You can apply it without removing it from the stash list using:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry with the message **keep‑this** is `stash@{1}`. You can apply it without removing it from the stash list with:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that holds the “keep‑this” work is **`stash@{1}`**. You can apply it without removing it from the stash list by running:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that holds the work saved with the message **“keep‑this”** is:
```
stash@{1}
```
To apply it without removing it from the stash list, you can run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash with the message **“keep‑this”** is `stash@{1}`. You can apply it without removing it using:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash containing the message **“keep-this”** is the second entry in the stash list:
```
stash@{1}
```
To apply it without removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash with the message **“keep‑this”** is `stash@{1}`.
To apply it without removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash that contains **'keep‑this'** is `stash@{1}`. To apply it without removing it from the list, run:
```bash
git stash apply stash@{1}
```
The stash reference containing 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
The key distinction:
- `git stash pop` — applies **and removes** the stash entry
- `git stash apply` — applies but **keeps** the stash entry in the list
Since you stashed "Work to keep" first and then stashed "another work" on top of it, the older "keep-this" entry sits at index 1 (stash@{1}), while the newer one is at stash@{0}.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
Thestash entry containing 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
Unlike `git stash pop`, the `git stash apply` command applies the changes to your working directory but leaves the stash entry intact in the stash list, so you can reuse it later if needed.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
# Stash Reference: `stash@{1}`
The 'keep-this' message is on **stash@{1}** (the older entry in the list).
## Command to Apply Without Removing
```bash
git stash apply stash@{1}
```
### Why `apply` instead of `pop`?
| Command | Behavior |
|---------|----------|
| `git stash pop` | Applies **and** removes the entry from the stash list |
| `git stash apply` | Applies **but keeps** the entry in the stash list ✅ |
### Verification
Looking at the diff, `stash@{1}` changes `file.txt` from `Initial` → `Work to keep`, which matches what you want to keep. After running `apply`, you can re-apply it later or drop it manually with `git stash drop stash@{1}` when you're done.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
# Stash Reference: `stash@{1}`
The stash entry containing **'keep-this'** is **`stash@{1}`**.
## Verification from the stash details:
Looking at `stash@{1}`, the diff confirms it contains the "Work to keep" change:
```diff
-Initial
+Work to keep
```
While `stash@{0}` contains the later "Another work" change:
```diff
-Initial
+Another work
```
## Command to Apply Without Removing
Since you want to apply the stash but **keep it in the stash list**, use `git stash apply` (not `git stash pop`):
```bash
git stash apply stash@{1}
```
### Quick comparison:
| Command | Behavior |
|---------|----------|
| `git stash pop stash@{1}` | Applies **and removes** `stash@{1}` from the list |
| `git stash apply stash@{1}` | Applies but **keeps** `stash@{1}` in the list ✅ |
> **Note:** If you later decide to remove the stash manually, you can run `git stash drop stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
Based on the `git stash list` output and the stash details, the stash entry containing 'keep-this' is:
`stash@{1}`
This is the correct reference to use when applying the stash without removing it from the stash list. You would use the command:
```bash
git stash apply stash@{1}
```
This will apply the changes from the "keep-this" stash while keeping it in your stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
To address the user's request, we need to identify the stash entry that contains 'keep-this' and provide the appropriate stash reference. The stash list shows that the most recent stash is at `stash@{0}` with the message 'another', and the stash before that, which contains 'Work to keep' with the message 'keep-this', is at `stash@{1}`. Therefore, to apply 'keep-this' without removing it from the stash list, the correct stash reference is:
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
To identify the correct stash entry for the 'keep-this' stash, it's essential to understand the reverse chronological order of Git stashes. The most recent stash is always at `stash@{0}`, and the older ones follow in descending order. Given that the user first stashed 'Work to keep' with the message 'keep-this' and then stashed another work, the 'keep-this' stash is the older one, which corresponds to `stash@{1}`.
Therefore, the stash entry for 'keep-this' is:
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing the work labeled 'keep-this' is `stash@{1}`. Therefore, the stash reference you need is:
**stash@{1}**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
To apply the stash entry containing 'keep-this' without removing it from the stash list, you need to use the stash reference for that specific entry. Based on the provided Git stash list:
- `stash@{0}` contains "another"
- `stash@{1}` contains "keep-this"
The stash reference for the 'keep-this' entry is: **stash@{1}**
To apply it without removing, you would use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash reference for the 'keep-this' entry is stash@{1}. This is because in Git, the most recent stash is labeled as stash@{0}, and each subsequent stash is numbered sequentially. Since 'keep-this' was stashed first and then another work was stashed afterward, 'keep-this' is now the second most recent stash, hence stash@{1}.
To apply this stash without removing it from the list, you would use the command `git stash apply stash@{1}`.
The stash reference is:
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The `'keep-this'` stash is at index **1**:
**`stash@{1}`**
Since `git stash` puts the newest stash at index `0`, the older `'keep-this'` stash was pushed down to `stash@{1}` when `'another'` was created afterward.
To apply it **without** removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw)
{
"stash": "stash@{1}"
}
The entry containing `'keep-this'` is:
**`stash@{1}`**
Since Git stashes form a stack (LIFO), the most recent stash (`'another'`) is at index `0`, and the earlier stash (`'keep-this'`) shifted down to index `1`.
To apply it **without** removing it from the stash list, you would run:
```bash
git stash apply stash@{1}
```
The stash entry containing `'keep-this'` is:
**`stash@{1}`**
To apply it **without removing** it from the stash list, you would run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing **'keep-this'** is:
**`stash@{1}`**
To apply it **without removing** it from the stash list, you would run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing **`keep-this`** is:
```text
stash@{1}
```
To apply it without removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
`stash@{0}` is the most recent one (`another`), while `stash@{1}` is the one with message `keep-this` that contains “Work to keep.”
stash@{1}
JSON Schema
Structured Output
(raw)
{ "stash" : "stash@{1}" }
The `keep-this` stash is:
```git
stash@{1}
```
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
(`apply` leaves the stash entry intact; `pop` would remove it.)
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
`stash@{1}` contains the message `'keep-this'` and the change `Work to keep`.
To apply it without removing it from the stash list:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry with the message **“keep-this”** is:
```text
stash@{1}
```
To apply it **without removing** it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
**Stash reference: `stash@{1}`**
Git stash operates as a stack — the most recent stash gets index `0`, and older entries are pushed down. Since you stashed 'keep-this' *first* and 'another' *second*, the 'keep-this' entry sits at `stash@{1}` (confirmed by both its message `On main: keep-this` and its diff showing `+Work to keep`).
To apply it while keeping it in the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
> ⚠️ **Note:** Stash indices shift as you add/remove entries. If you later drop `stash@{0}`, the 'keep-this' entry becomes `stash@{0}`. The reference `stash@{1}` is valid for the *current* state of the stash list shown above.
**`stash@{1}`**
Stashes are stored as a stack (LIFO), so when you stashed the second work, the first stash (`keep-this`) was pushed down from `stash@{0}` to `stash@{1}`. The diff confirms it — `stash@{1}` contains `+Work to keep`.
To apply it without removing it from the stash list:
```bash
git stash apply stash@{1}
```
Note: using the explicit reference `stash@{1}` matters here — a bare `git stash apply` would apply `stash@{0}` (the "another" stash) instead.
**`stash@{1}`** is the stash entry containing 'keep-this'.
You can verify this two ways:
1. The stash list shows: `stash@{1}: On main: keep-this`
2. Its diff contains `+Work to keep`, matching the work you stashed with that message.
To apply it **without** removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
Note: use `apply` rather than `pop` — `git stash pop` would apply the stash and then drop it from the list, while `apply` leaves the entry intact so you can use it again later.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
**`stash@{1}`**
Git stash operates as a stack (LIFO) — each new stash pushes previous entries down. Since you stashed 'keep-this' *first* and then stashed 'another', the newer stash took position `stash@{0}`, pushing 'keep-this' to `stash@{1}`.
This is confirmed by the stash details, where `stash@{1}` shows the change `+Work to keep`.
To apply it without removing it from the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
**Important note:** If you were to stash additional work later, the indices would shift again, and 'keep-this' would move to `stash@{2}`, and so on. Always verify with `git stash list` before applying if you've created new stashes in the meantime.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The 'keep-this' entry is **`stash@{1}`**.
Since stashes are stored as a stack with the most recent at the top, your first stash ('keep-this') got pushed down to index 1 when you stashed 'another'.
To apply it **without** removing it from the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
**One caveat:** stash indices are positional, not fixed. If you drop or pop `stash@{0}`, your 'keep-this' stash will shift to `stash@{0}`. So run the apply before modifying the stash stack, or double-check with `git stash list` first.
**`stash@{1}`** contains 'keep-this'.
Since the most recent stash always takes index `0`, your first stash ('keep-this') was pushed down to `stash@{1}` when you created the second stash ('another').
To apply it without removing it from the stash list:
```bash
git stash apply stash@{1}
```
Using `apply` (instead of `pop`) restores the changes while keeping the entry in the stash list.
**`stash@{1}`** contains the 'keep-this' work.
You can confirm this two ways:
- The stash list shows `stash@{1}: On main: keep-this`
- Its diff shows `+Work to keep` in file.txt
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
(Unlike `git stash pop`, `apply` leaves the entry in the stash list.)
One caution: stash references are positional. If you drop `stash@{0}` later, the 'keep-this' entry will shift to `stash@{0}`, so double-check with `git stash list` before referencing it again.
**`stash@{1}`** contains the 'keep-this' stash (the one with `+Work to keep`).
Git stash works as a stack: the most recent stash is always `stash@{0}`. When you stashed the second work ("another"), it pushed your first stash down to `stash@{1}`.
To apply it **without** removing it from the stash list, use `apply` (not `pop`):
```bash
git stash apply stash@{1}
```
- `git stash apply` — restores the changes but keeps the entry in the stash list
- `git stash pop` — restores the changes **and** removes the entry
**Note:** stash indices shift as entries are added or removed. If you later pop or drop `stash@{0}`, the 'keep-this' entry will become `stash@{0}`. So it's good practice to check `git stash list` again before referencing by index in a later session.
The entry that contains **keep-this** is:
```
stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains the “keep‑this” message is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash that contains the “keep‑this” change is **`stash@{1}`**. This is the entry listed as:
```
stash@{1}: On main: keep-this
```
So you can apply that stash with `git stash apply stash@{1}` (or any other operation) without having to remove it from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash that contains the message **`'keep-this'`** is logged as:
```
stash@{1}: On main: keep-this
```
Therefore, the reference you need is:
**`stash@{1}`**.
stash@{1}: On main: keep-this
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}: On main: keep-this"
}
The entry that contains **keep‑this** is **stash@{1}** (i.e., `refs/stash@{1}`).
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The entry with the message **keep-this** is **stash@{1}**.
You can apply it without removing it from the stash list using:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The entry that contains the message **keep-this** is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing **`keep-this`** is:
**`stash@{1}`** — `On main: keep-this`
If you want to apply it **without removing it from the stash list**, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing **`keep-this`** is:
**`stash@{1}`**
You can apply it without removing it from the stash list with:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`keep-this` is in **`stash@{1}`**.
So the stash reference you want is:
```bash
stash@{1}
```
If you want to apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing **`keep-this`** is:
**`stash@{1}`**
If you want to apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing **“keep-this”** is:
**`stash@{1}`** — `On main: keep-this`
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry that contains **`keep-this`** is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing `keep-this` is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry that contains `'keep-this'` is **`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing the message **`keep-this`** is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing `'keep-this'` is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
Use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}` contains `keep-this`.
Use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
Use `git stash apply stash@{1}` to apply it without removing it from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
Use `git stash apply stash@{1}` if you want to apply it without removing it from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
If you want to apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}` contains `keep-this`. Apply it without removing it using:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}` contains the message `keep-this`. Use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry is:
```bash
stash@{1}
```
Apply it without removing it using:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}` contains `keep-this`. Use:
```bash
git stash apply stash@{1}
```
This applies the stash without removing it from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}` contains `keep-this`. Use:
```bash
git stash apply stash@{1}
```
This applies it without removing it from the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`keep-this` is in **`stash@{1}`**. Apply it without removing it:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}` contains `keep-this`. Use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**stash@{1}**
(You can apply it without removing it using `git stash apply stash@{1}`.)
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry that holds the “keep‑this” changes is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains the *keep‑this* work is **`stash@{1}`**.
You can apply it without removing it from the stash list using:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that holds the “keep‑this” change is:
**`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
**stash@{1}**
The stash that contains “keep-this” is:
```
stash@{1}
```
You can apply it without dropping it from the stash list using:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The entry that holds the “keep‑this” changes is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash that contains the message “keep-this” is **`stash@{1}`**.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **stash@{1}**.
### Reference:
```
stash@{1}: On main: keep-this
```
### Explanation:
- `stash@{1}` contains the changes from the message 'keep-this', as shown in its diff:
```diff
-Initial
+Work to keep
```
- Use `git stash apply stash@{1}` to apply those changes without removing them from the stash stack.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **stash@{1}**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
This will apply the changes while keeping the stash intact.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
This will apply the changes from the 'keep-this' stash while keeping the stash entry intact.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
To identify which stash entry contains 'keep-this', we need to examine the stash details provided. The message 'keep-this' corresponds to the stash entry `stash@{1}`, as indicated in the git stash list. The diff for `stash@{1}` shows changes from 'Initial' to 'Work to keep', which matches the message. Therefore, the stash reference containing 'keep-this' is `stash@{1}`.
The goal is to apply the changes from this stash without removing it from the stash list. The correct Git command to achieve this is `git stash apply stash@{1}`, which applies the stash but keeps it in the list. However, since the task only asks for the stash reference, the answer is:
\boxed{stash@{1}}
The stash entry containing the 'keep-this' message is **stash@{1}**. This corresponds to the second entry in the stash list. To apply it without removing it from the stash, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry containing 'keep-this' is **stash@{1}**.
Here's the breakdown:
- **stash@{0}** has the message "another" and contains the diff for "Another work".
- **stash@{1}** has the message "keep-this" and contains the diff for "Work to keep".
To apply `stash@{1}` without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}: On main: keep-this
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}: On main: keep-this"
}
The stash entry containing 'keep-this' is **stash@{1}**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
This preserves the stash in the list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash entry that contains 'keep-this' is `stash@{1}`.
You can apply it without removing it from the stash list by using:
```bash
git stash apply stash@{1}
```
The `apply` command applies the changes but leaves the stash entry intact. In contrast, `git stash pop` would apply and remove it.
```
stash@{1}: On main: keep-this
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is **stash@{1}**.
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
- **Rationale**:
- The message `'keep-this'` explicitly appears in `stash@{1}` in the stash list.
- `git stash apply` applies the changes without popping (removing) the stash, whereas `git stash pop` would remove it.
- The stash details confirm `stash@{1}` modifies the file to "Work to keep," matching the user’s description.
Reference: `stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
Based on the git stash list provided:
**stash@{1}** contains the message "keep-this".
To apply this stash entry without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
This will apply the changes from "keep-this" to your working directory while keeping it available in your stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
Based on the stash list provided, the stash entry containing 'keep-this' is **stash@{1}**.
To apply this stash without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
The key difference is using `git stash apply` instead of `git stash pop` - `apply` brings the changes back into your working directory while keeping the stash entry intact in your stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
Based on the git stash list provided:
- **stash@{0}**: contains "another"
- **stash@{1}**: contains "keep-this"
The stash entry that contains 'keep-this' is **stash@{1}**.
To apply this stash without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
The `git stash apply` command applies the changes but keeps the stash entry in the list, unlike `git stash pop` which removes it after applying.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
Looking at the stash list and details provided:
- **stash@{0}** contains "another" (the second stash you made)
- **stash@{1}** contains "keep-this" (the first stash you made with that message)
Since you want to apply 'keep-this' without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
**Answer: stash@{1}** contains 'keep-this'.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
Based on the stash list provided, the stash entry containing 'keep-this' is **stash@{1}**.
To apply this stash without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
Note: Using `git stash apply` keeps the stash entry in the list, whereas `git stash pop` would remove it after applying.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash reference that contains `'keep-this'` is:
**`stash@{1}`**
To apply it without removing it from your stash list, run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash reference is `stash@{1}`.
*(To apply it without removing it from the stash list, you would run: `git stash apply stash@{1}`)*
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash reference containing `'keep-this'` is:
**`stash@{1}`**
*(To apply it without removing it from the stash list, use: `git stash apply stash@{1}`)*
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is **`stash@{1}`**.
### Explanation:
- You stashed 'Work to keep' first, which created `stash@{1}` (as shown in the list).
- Then you stashed another work, which became the new top of the stash list: `stash@{0}`.
- The message `'keep-this'` corresponds to the first stash you made, which is currently at index **1**.
### How to apply it without removing:
Use the following command:
```bash
git stash apply stash@{1}
```
This applies the changes from `stash@{1}` to your working directory but leaves the stash entry in the stash list.
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing `'keep-this'` is:
**`stash@{1}`**
*(To apply it without dropping it from the list, you would run: `git stash apply stash@{1}`)*
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing the message `'keep-this'` is:
**`stash@{1}`**
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing 'keep-this' is **`stash@{1}`**.
*(To apply it without removing it from the stash list, you would run: `git stash apply stash@{1}`)*
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains 'keep-this' is **stash@{1}**.
**Explanation:**
- The prompt states you stashed 'Work to keep' with message 'keep-this' *first*.
- Then you stashed "another work".
- In Git, `stash@{0}` is the most recent stash, and indices increase for older stashes.
- The `git stash list` confirms:
- `stash@{0}` corresponds to "another".
- `stash@{1}` corresponds to "keep-this".
- The diff for `stash@{1}` also shows `+Work to keep`, matching the description.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash": "stash@{1}"}
The stash reference containing `'keep-this'` is:
`stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry containing `'keep-this'` is **`stash@{1}`**.
*(Note: To apply it without removing it from the stash list, use `git stash apply stash@{1}`)*
The stash reference is: **`stash@{1}`**
The stash entry containing `'keep-this'` is:
**`stash@{1}`**
*(To apply it without removing it from the stash list, run: `git stash apply stash@{1}`)*
The stash entry that contains 'keep-this' is **`stash@{1}`**.
**Reasoning:**
1. The `git stash list` output explicitly shows the commit messages associated with each stash index.
2. `stash@{0}` corresponds to the message "another".
3. `stash@{1}` corresponds to the message "keep-this".
4. Additionally, the diff details for `stash@{1}` show the change `+Work to keep`, which matches the stash message provided in the prompt.
The stash entry containing 'keep-this' is:
**`stash@{1}`**
The stash entry containing `'keep-this'` is **`stash@{1}`**.
To apply it without popping/removing it from the stack, you would run:
```bash
git stash apply stash@{1}
```
Based on the `git stash list` provided, the stash entry containing the message 'keep-this' (and the content "Work to keep") is:
**`stash@{1}`**
To perform the action you described (applying the stash without removing it from the list), you would use the following command:
```bash
git stash apply stash@{1}
```
The stash entry containing `'keep-this'` is:
**`stash@{1}`**
*(To apply it without removing it from the stash list, you would run: `git stash apply stash@{1}`)*
The stash entry containing `'keep-this'` is:
**`stash@{1}`**
To apply it without removing it from the stash list, you would run:
```bash
git stash apply stash@{1}
```
stash@{1}
The stash entry containing `'keep-this'` is **`stash@{1}`**.
## Answer
The stash entry containing **'keep-this'** is:
### **`stash@{1}`**
**Reasoning:**
1. You first stashed "Work to keep" with the message `keep-this`. At that point, it was `stash@{0}`.
2. You then stashed "another" work, which was pushed to the top of the stack as the **new** `stash@{0}`, shifting your first stash down to `stash@{1}`.
3. The stash details confirm this — `stash@{1}` shows the diff changing `Initial` → `Work to keep` with the message `On main: keep-this`.
To apply it **without removing** it from the stash list, you would run:
```bash
git stash apply stash@{1}
```
> **Key distinction:** `git stash apply` keeps the entry in the stash list, whereas `git stash pop` would apply **and** remove it.
stash@{1}
Based on the provided git stash list, the stash entry that contains the message 'keep-this' is:
**stash@{1}**
*(Note: To apply this specific stash without removing it from the list, you would use the command `git stash apply stash@{1}`)*
Based on the provided stash list, the entry with the message `'keep-this'` is:
**`stash@{1}`**
This is confirmed by both the stash list showing `stash@{1}: On main: keep-this` and the stash details showing the "Work to keep" diff at that same reference. To apply it without removing it from the stash list, you would use `git stash apply stash@{1}` (as opposed to `git stash pop`, which would remove it).
Based on the provided git stash list, the stash entry that contains the message 'keep-this' is:
**stash@{1}**
*(Note: To apply it without removing it from the stash list, you would use the command `git stash apply stash@{1}`)*
The stash reference that contains 'keep-this' is **`stash@{1}`**.
To apply it without removing it from the stash list, you would use the command:
```bash
git stash apply stash@{1}
```
Based on the Git stash list provided, the stash entry that contains 'keep-this' is:
**`stash@{1}`**
*(To apply it without removing it from the stash list, you would use the command `git stash apply stash@{1}`)*.
The stash reference that contains 'keep-this' is **`stash@{1}`**.
*(Note: To apply it without removing it from the stash list, you would use the command `git stash apply stash@{1}`)*
Based on the provided git stash list, the entry with the message 'keep-this' is at index 1.
The stash reference is: **`stash@{1}`**
To apply it without removing it from the stash list, you would use the command:
```bash
git stash apply stash@{1}
```
The stash entry that contains 'keep-this' is referenced as:
`stash@{1}`
*(Note: To apply it without removing it from the stash list, you would use the command `git stash apply stash@{1}` instead of `git stash pop`)*
The stash entry containing **'keep-this'** is:
**`stash@{1}`**
To apply it without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains **'keep-this'** is:
**`stash@{1}`**
(To apply it without dropping it from the stash list, you would run `git stash apply stash@{1}`.)
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry that contains **'keep-this'** is:
**`stash@{1}`**
(To apply it without removing it from the stash list, you would use `git stash apply stash@{1}`.)
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains `'keep-this'` is:
**`stash@{1}`**
This is the entry with the message **`keep-this`** (`stash@{1}: On main: keep-this`), and its diff shows the change **“Work to keep”**.
To apply it without removing it from the stash list, you would use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry is **`stash@{1}`**.
(You can apply it without removing it using `git stash apply stash@{1}`.)
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The message “keep-this” is on **stash@{1}**.
To apply it without removing it from the stash list:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash with message **'keep-this'** is:
**`stash@{1}`**
To apply it without removing it from the stash list:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The entry with message `keep-this` is:
**`stash@{1}`**
So to apply it without removing it from the stash:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry with message `keep-this` is:
**`stash@{1}`**
To apply it while leaving it in the stash list:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash message `'keep-this'` is in **stash@{1}**.
To apply it without removing it from the list, use:
```bash
git stash apply stash@{1}
```
(Using `git stash apply` — rather than `pop` — leaves the entry in the stash list.)
The message “keep-this” is on **stash@{1}**.
So the reference is:
```
stash@{1}
```
To apply it without removing it from the stash list:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The entry with message `keep-this` is:
**`stash@{1}`**
Apply it without removing it using:
```bash
git stash apply stash@{1}
```
The stash with message **'keep-this'** is:
**`stash@{1}`**
Apply it without removing from the list with:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The entry is **`stash@{1}`** (message `keep-this`).
Apply it without removing it from the list with:
```bash
git stash apply stash@{1}
```
The stash with message **'keep-this'** is:
**`stash@{1}`**
Apply it without removing it from the list with:
```bash
git stash apply stash@{1}
```
The stash entry with message **'keep-this'** is **`stash@{1}`**.
Because you want to apply it without removing it from the list, you should use `git stash apply` (not `pop`):
```bash
git stash apply stash@{1}
```
`stash@{0}` is the newer "another" stash, and `stash@{1}` is the older "keep-this" stash.
The entry with message **`keep-this`** is:
**`stash@{1}`**
To apply it without removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
**stash@{1}**
This is the correct stash reference because:
- It matches the message "keep-this"
- The diff shows "+Work to keep" (matching the original content)
- stash@{0} is the newer stash ("another")
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing 'keep-this' is `stash@{1}` (apply via `git stash apply stash@{1}` to avoid dropping it).
Final answer: stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing 'keep-this' is `stash@{1}`.
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash list shows two entries, with the most recent (another work) at index 0. Because the first stash operation (keep-this) occurred earlier, it was pushed down the stack and now resides at index 1. Consequently the reference that still holds the desired change set is `stash@{1}`.
Applying it while leaving the entry on the list is performed with
```sh
git stash apply stash@{1}
```
(The `apply` sub-command, unlike `pop`, does not delete the stash after it has been restored.)
Final answer: stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
stash@{1}
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
**stash@{1}**
To apply it without removing from the stash list, use:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**stash@{1}**
This is the entry whose message is "keep-this" (and whose diff contains the "Work to keep" change).
To apply it without removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**stash@{1}**
Git numbers stashes newest-first, so the later “another” stash is `stash@{0}` and the earlier “keep-this” stash is `stash@{1}`. Its diff also matches the kept content (`+Work to keep`).
To apply it without dropping it from the list:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**stash@{1}**
This entry holds the work you stashed with message `keep-this` (the diff shows `+Work to keep`).
`stash@{0}` is the later “another” stash.
To apply it while leaving it on the stash list, use:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**stash@{1}**
The stash list shows `stash@{1}` has the message "keep-this".
(The more recent stash is always at `stash@{0}`.)
To apply it without removing it from the list:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
**stash@{1}**
Git stash is a stack (LIFO). The most recent stash is always `stash@{0}`.
You first stashed the work whose message is `keep-this`, then stashed “another”, so:
- `stash@{0}` = the later “another” entry
- `stash@{1}` = the earlier “keep-this” entry
(Confirmed by the provided diffs: `stash@{1}` contains the change “Work to keep”.)
To apply it without dropping it from the stack use:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {"stash":"stash@{1}"}
The stash entry containing 'keep-this' is:
**stash@{1}**
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry containing 'keep-this' is **stash@{1}**.
The stash entry containing 'keep-this' is **stash@{1}**.
**Reasoning:**
In Git, the stash list indexes stashes from most recent to oldest. The most recent action (stashing "another work") is always at the top (**stash@{0}**). Therefore, the previous action (stashing "Work to keep") is at **stash@{1}**.
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry containing 'keep-this' is **stash@{1}**.
stash@{1}: On main: keep-this
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}: On main: keep-this"
}
The stash entry containing 'keep-this' is:
**stash@{1}**
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry containing 'keep-this' is **stash@{1}**.
To apply it without removing it from the stash list, you would use the command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash reference for the entry containing 'keep-this' is **stash@{1}**.
To apply this stash without removing it from the stash list, you can use the command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry that contains 'keep-this' is:
**stash@{1}**
To apply this stash without removing it from the stash list, you would use the command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) {
"stash": "stash@{1}"
}
The stash entry that contains 'keep-this' is **stash@{1}**.
To apply this stash without removing it from the stash list, you would use the command:
`git stash apply stash@{1}`
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
The stash entry containing `'keep-this'` is:
```bash
stash@{1}
```
You can apply it without removing it from the stash list with:
```bash
git stash apply stash@{1}
```
stash@{1}
JSON Schema
Structured Output
(raw) { "stash": "stash@{1}" }
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: Thestash entry containing 'keep-this' is `stash@{1}`.
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: The stash entry containing 'keep-this' is:
**`stash@{1}`**
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: Let's break down your question and the data provided:
### Your situation:
- You **stashed** `'Work to keep'` with message `'keep-this'`.
- Then you **stashed another work** (with a different message).
- Now, you want to **apply** `'keep-this'` (i.e., reapply that specific stash), **but do not remove it from the stash list**.
### The Git stash list you posted:
```
stash@{0}: On main: keep-this
stash@{1}: On main: keep-this
```
But actually, based on your description, you stashed "Work to keep" once, and then another work. Let's clarify the stash references as per your description:
- **First stash:**
Message: `keep-this`
Stash ref: `stash@{0}`
- **Second stash:**
Message: something else (not relevant for this question)
Stash ref: `stash@{1}`
#### The actual stash entries:
- `stash@{0}`: message is `keep-this`
- `stash@{1}`: message is *not* `keep-this` (it's "another work")
### Answer
**The stash entry containing 'keep-this' is:**
```
stash@{0}
```
**If you want to apply 'keep-this' without removing it from the stash list, you can use:**
```sh
git stash apply stash@{0}
```
This will apply the changes from `stash@{0}` (the one with message `keep-this`) onto your current branch, **leaving the original stash intact**.
---
**Summary Table:**
| Stash Ref | Message |
|-------------|----------------|
| stash@{0} | keep-this |
| stash@{1} | (other work) |
**So, the stash entry containing 'keep-this' is:**
**`stash@{0}`**
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: The stash entry containing **'keep-this'** is:
**`stash@{1}`**
*To apply it without removing it from the stash list, you would run:*
```bash
git stash apply stash@{1}
```
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 2 (char 1)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 2 (char 1)
Invalid JSON. Output: {
"stash"
:
"stand‐of"
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting ',' delimiter: line 143873 column 3 (char 218598)
Failure: Failed to parse structured JSON response: Expecting ',' delimiter: line 143873 column 3 (char 218598)
On main: keep-this
JSON Schema
Structured Output
(raw) {
"stash": "On main: keep-this"
}
Failure: Expected stash reference 'stash@{1}'
(empty output)
Failure: Expected stash reference 'stash@{1}'
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-2519eef8-f94a-972c-8c35-4a9eaae95914","request_id":"2519eef8-f94a-972c-8c35-4a9eaae95914"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-c839f4d4-0cd4-9909-89b0-74e12e2c6d78","request_id":"c839f4d4-0cd4-9909-89b0-74e12e2c6d78"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-552aa6b5-801a-903f-9b9d-ed68ad91c200","request_id":"552aa6b5-801a-903f-9b9d-ed68ad91c200"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-1f320361-c142-94fa-8b00-713a1a86182e","request_id":"1f320361-c142-94fa-8b00-713a1a86182e"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-b84ed6a1-ae41-9a30-a184-771885618499","request_id":"b84ed6a1-ae41-9a30-a184-771885618499"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-23b55997-f1ce-9704-b318-fbc3a2afd1b8"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-52a22d8f-df97-9f99-aca6-a9014f876e5e"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-c761a035-699c-9c0f-83ab-c18bb08959bc"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-23c2d8f2-afdf-9db0-ad0c-7f4231c237a8"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-98971502-2a8a-9581-9e13-0ffa15d5eb4e"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': 'data: {"error":{"code":"invalid_parameter_error","param":null,"message":"\'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error"},"id":"chatcmpl-776c84bd-f87c-9f27-b40b-6da0a09ac9a7"}\n\n', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-7e26a988-7628-9ac1-aeda-79cc06e4cf25","request_id":"7e26a988-7628-9ac1-aeda-79cc06e4cf25"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-485ccc75-197d-94af-bf91-684de895c98f","request_id":"485ccc75-197d-94af-bf91-684de895c98f"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-371a3fbd-c220-9a89-96a3-5f27ba18d869","request_id":"371a3fbd-c220-9a89-96a3-5f27ba18d869"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-c43eaf11-5072-9e8c-b55a-acc13aea310d","request_id":"c43eaf11-5072-9e8c-b55a-acc13aea310d"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-4454139d-c82f-9eb2-88fe-c79b006a7883","request_id":"4454139d-c82f-9eb2-88fe-c79b006a7883"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-bbb52165-7c10-9738-b2a9-4350c8ac37e1","request_id":"bbb52165-7c10-9738-b2a9-4350c8ac37e1"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-03bf03f7-778e-9c45-b9b4-f5866cbcc8a3","request_id":"03bf03f7-778e-9c45-b9b4-f5866cbcc8a3"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-4391122a-b62e-9ada-97f6-47003570bf83","request_id":"4391122a-b62e-9ada-97f6-47003570bf83"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-beb7a529-7fca-9eb9-80c0-ac515535a82f","request_id":"beb7a529-7fca-9eb9-80c0-ac515535a82f"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
(empty output)
JSON Schema
Structured Output
Failure: Error code: 400 - {'error': {'message': 'Provider returned error', 'code': 400, 'metadata': {'raw': '{"error":{"message":"<400> InternalError.Algo.InvalidParameter: \'messages\' must contain the word \'json\' in some form, to use \'response_format\' of type \'json_object\'.","type":"invalid_request_error","param":null,"code":"invalid_parameter_error"},"id":"chatcmpl-749a64c6-be55-9421-abfb-b373aec34919","request_id":"749a64c6-be55-9421-abfb-b373aec34919"}', 'provider_name': 'Alibaba', 'is_byok': False}}, 'user_id': 'user_3FrVBkmFqVIuZ58dEh7AU8vhXUV'}
Invalid JSON. Output: The stash entry containing **'keep-this'** is **`stash@{1}`**.
To apply it without removing it from the stash list, use:
bash
git stash apply stash@{1}
```
(Using `apply` rather than `pop` keeps the entry in place; you could also use `git stash apply 'stash@{1}'` to avoid brace expansion issues.){ "stash": "stash@{1}" }
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: The entry with the message **`keep-this`** is:
**`stash@{1}`**
So to apply it without removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
(Use `apply` rather than `pop` so it stays in the list.)
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: The entry with message **'keep-this'** is:
**`stash@{1}`**
To apply it without removing it from the stash list, use:
```bash
git stash apply stash@{1}
```
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: The stash with message **'keep-this'** is:
**`stash@{1}`**
To apply it without removing it from the stash list, run:
```bash
git stash apply stash@{1}
```
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: The entry is **`stash@{1}`**.
To apply it without popping (so it stays in the stash list):
bash
git stash apply stash@{1}
```
That applies the `keep-this` change (`Work to keep`) while leaving `stash@{1}` intact.{"stash": "stash@{1}"}
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output: The entry is **`stash@{1}`** (message `keep-this`).
Apply it without removing:
```bash
git stash apply stash@{1}
```
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Invalid JSON. Output:
JSON Schema
Structured Output
Structured Output Error
Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)
Failure: Failed to parse structured JSON response: Expecting value: line 1 column 1 (char 0)